Filter
Top Products
3. Open the pump door.
4. Pull flap forward to remove.
5. Place a container close to the pump to
collect any spillage.
6. Pull out the emergency emptying hose,
place it in the container and remove its
cap.
7. When no more water comes out, un-
screw the pump cover by turning it an-
ti-clockwise and remove the filter. Use
pliers, if necessary. Always keep a rag
nearby to dry up any water spillages
when removing the cover.
Clean the filter under a tap, to remove
any traces of fluff.
8. Remove foreign bodies and fluff from
the filter seat and from the pump im-
peller.
9. Check carefully whether the pump im-
peller rotates (it rotates jerkily). If it
doesn’t rotate, please contact your
Service Centre.
10. Put the cap back on the emergency
emptying hose and place the latter
back in its seat.
26
Care and cleaning