Filter
Top Products
13
Operating Instructions
Cycle Options
Suitable options will automatically be indicated
when the cycle is selected.
To add options, press the corresponding options
buttons to illuminate the selections desired. To
delete options, press the options buttons again
and the indicator lights will turn off.
To protect your fabrics, not all options are avail-
able with every cycle. If an option is not appropri-
ate for the cycle, it will not be displayed. Occa-
sionally, two options in the same cycle will confl ict
with each other, like line dry and anti static. When
this happens, the option selected fi rst will cause
the confl icting option to not be selectable.
NOTE
To change the options once the cycle has
begun, press the pause button, make the new
selections and press start again.
NOTE
The sanitize and add steam options will be
retained and recalled if either is selected and
saved in the my favorite cycle.
All options selected for the cycle, except sanitize
and add steam, will be remembered and recalled
each time that cycle is selected in the future. To
prevent unintentional and accidental exposure of
delicate material to sanitize heat or unexpected
steam, the sanitize option and the add steam
option will not be remembered and must be rese-
lected each time.
EXTENDED TUMBLE
Select the extended tumble option if the dried
load might not be removed promptly at the end of
the cycle. The dry load will tumble continuously
without heat for 30 minutes. EXT. TUMBLE will be
displayed and a chime will sound periodically to
remind you to remove the dried load.
LIGHT (press & hold)
The drum light will come on whenever the door is
opened to illuminate the drum during loading and
unloading. Closing the door turns off the light. The
drum light will automatically turn off if the door is left
open more than 3 minutes.
You can activate the drum light during a cycle by
pressing and holding the extended tumble button.
The light will stay on during the cycle for 3 minutes.
To turn it off, press and hold the button again.
DELAY START
Press delay start to select a drying time conve-
nient to your schedule or during off peak energy
hours. The delay time selected will be displayed
and begin counting down when you select start.
NOTE
While counting down during delay start, you will
notice your dryer periodically tumbling for a few
minutes without heat to redistribute the load,
maximizing load freshness.
CHIME (press & hold)
A signal will sound at the end of the cycle (and
periodically during extended tumble) if this option
is selected.
ADD STEAM
The add steam option injects steam into the cloth-
ing prior to cool down to reduce wrinkling, ironing
and static cling.
ANTI STATIC (press & hold)
The anti static option injects steam into the cloth-
ing just before cycle completion to reduce static.
LINE DRY
Select this option to simulate hanging your laundry
in a summer breeze combined with the wrinkle-
releasing benefi ts of tumble action. Since drying
times are calculated with the dryer’s automatic
moisture sensors and heat is radically reduced
or eliminated, cycle time will be lengthened. As
a result, depending on moisture content of load,
overall energy consumption decreases.
SHRINK GUARD
Select shrink guard to lower the initial drying tem-
perature to protect fabrics from overdrying.
CONTROL LOCK
To lock the controls between cycles, press and
hold the control lock button for 5 seconds. Re-
peat to unlock the controls when you are ready to
operate the dryer. Use this feature to reduce the
likelihood of accidental operation by children.
ECO FRIENDLY
The eco friendly option reduces the drying tem-
perature a few degrees to save energy. In conjunc-
tion with automatic moisture sensors, cycle times
will increase slightly, but overall energy usage will
decrease.