24
3 Rotate and move trim ring cover plate to
opposite opening in trim and reinsert.
M)ReinstallingTrimRing
1 Close door.
2 Orienttrimso12positionisapproximately
¾”totheleftoftopcenter.Openinginring
should be on the hinge side.
3 Insert trim ring in slots and rotate clockwise
approximately¾”.
N)ReinstallingTrimPlug
1 Open door to 90 degree angle.
2 Install trim plug with 1 long, course-thread,
panhead screw.
O)Plugindryerandcontinueoperation.
Reversing Door
L)ReversingTrimRing
1 Trim ring orientation is marked on the back.
2 Remove trim ring cover plate. To remove
plate from left, pivot point is down. To
remove plate from right, pivot point is up.
UP