Filter
Top Products
Page 9
Time delayed start
The wash cycle completion time may be delayed by 2 to 48 hours. This feature is particu-
larly useful when you are at work and only want the machine to finish washing just be-
fore you arrive home.
To cancel the “time Delayed Start” press the power button. Wait five seconds before
pressing the power button once more to resume.
EXAMPLE: To set a completion time 8 hours from the present, proceed as follows:
REMAIN
REMAIN
8
START
HOLD
Display
DELAY
MODE
Set to 8
Display
CONVENIENT SPIN ONLY SELECTION
Press the POWER ON pad.
Press the CONTROL pad.
Press the START HOLD pad.
Customising programmes
POWER
MODE
CONTROL
SPIN ONLY
CONTROL
SPIN ONLY
MODE
CONTROL
SPIN ONLY
START
HOLD
MODE
SELECTING THE WASH TIME
Press the Mode pad and the WASH light will illuminate.
Repeatedly press the CONTROL pad to select 14, 18, 0, 6 or 10 minutes.
If you do not want a wash cycle, select the time at 0 minutes.
SELECTING THE NUMBER OF RINSES
Press the Mode pad and the RINSE light will illuminate.
Repeatedly press the CONTROL pad to select 2, 3, 4, 0, or 1 rinse.
If you do not want a rinse cycle, select the time at 0 rinse.
SELECTING THE SPIN TIME
Press the Mode pad and the SPIN light will illuminate.
Repeatedly press the CONTROL pad to select 5, 7, 9, 0, 1 or 3 minutes.
If you do not want a spin cycle, select the time at 0 .
Press the POWER ON pad.
Press the START / HOLD pad.
CONTROL
SPIN ONLY
START
HOLD