Page 9
Operational notes continued
Auxiliary function selection.
• The machine will restrict certain selections and make it impossible to select all
the auxiliary functions in a single wash programme. For example, if the
COTTON programme is selected, the QUICK WASH and PREWASH can not be
selected at the same time.
Programme progress display
• The progress of the wash cycle may be monitored by observing the lights of the
PROGRESS DISPLAY.
• The lights will glow sequentially until all the lights are on at the completion of
the cycle.
Adding laundry
• Provided the water intake level is not too high, it is possible to stop the machine
to add additional laundry.
• Press the START / PAUSE / CANCEL button.
• The door open indicator lights up after 1-2 minutes. Open the door and add the
additional laundry.
• Close the door and press the START / PAUSE / CANCEL button once more for
the machine to continue with the selected programme.
• If the door open indicator light does not glow after two minutes, the water
level is too high to add more laundry. Press the START / PAUSE / CANCEL
button and allow the programme to continue.
Time display
• The starting time of any programme may
be delayed by using the time delay
buttons. The delay time may be set at
intervals of 30 minutes.
• On the display, the delayed time is added to the duration of the programme. For
example : If the programme duration is 2 hours and 16 minutes and you wish to
delay the start by 2 hours then the display will show 4 hours and 16minutes.
• After the delay time is set, press the START / PAUSE / CANCEL button.
Programme cancelling before the machine has started.
• Press and hold the START / PAUSE / CANCEL button for 3 seconds.
• Set a new programme and press the START / PAUSE / CANCEL button once
more.
Programme cancelling after the machine has started.
• Press and hold the START / PAUSE / CANCEL button for 3 seconds.
• Water will drain from the machine. The progress display will move to Spin
• The door may be opened after the DOOR OPEN light glows.