Daewoo Auto Washer Washer User Manual


 
27
TROUBLE SHOOTING
NO
NO
NO
PROBLEM
THE INDICATOR
LAMPS(L.E.D)
DO NOT LIGHT
UP WHEN THE
POWER
BUTTON IS
PRESSED.
PROGRESS
LAMPS(LED)
DO NOT LIGHT
UP.
MOTOR
ROTATES WHEN
START/HOLD
BUTTON IS NOT
PRESSED.
ABNORMAL
NOISE DURING
WASH
PROCESS.
CHECK POINT
Is the plug connect-ed
to electric outlet?
Is the condition of
power button good?
Is the connector of the
P.C.B. ASSY connect-
ed properly?
Is input voltage of the
transformer normal?
Do you press
START/HOLD button?
Does the pressure switch
operate normally?
Check the output voltage
of P.C.B ASSY
Is the strange noise gen-
erated when the pulsator
rotates in TEST MODE
of P.C.B ASSY?
Is the V-belt worn out?
CAUSE SOLUTION
Connect the plug.
Change P.C.B ASSY.
Change Fuse
Connect the connector
properly.
Change P.C.B Assy
Change P.C.B ASSY.
Press START/HOLD but-
ton.
Replace P.C.B ASSY.
Change the pressure
switch.
Change P.C.B ASSY.
Remove the foreign mat-
ter.
Change the V-belt.
Power button is defective
Improper connection of
the connector.
Transformer is defective
P.C.B. ASSY is defec-
tive.
P.C.B ASSY is defective.
Pressure switch is defec-
tive.
P.C.B ASSY is defective
There is foreign matter
between pulsator and
tub.
V-belt is defective.
NO
YES
YES
YES
YES
NO
NO
YES
YES
Abnormal
YES
YES
NO
NO
Is Fuse opended?
CONCERNING OPERATION