Daewoo 1211 Washer/Dryer User Manual


 
8
Drop items into washer loosely. Items
should move easily through wash water for
best cleaning and wrinkle-free results.
Load washer properly and select correct
load size setting.
Overloading and selecting a setting too
small for the wash load can :
- Cause poor cleaning
- Increase wrinkling
- Create excessive lint
- Wear out items faster (because of pilling)
Mix large and small items in each load. Load
evenly to maintain washer balance.
An unbalanced load can make the washer
vibrate during spin.
Reduce wash time when using a small load
size setting. Load with only a few small
items needs less wash time.
Use a large load size setting to reduce
wrinkling with permanent press clothes and
some synthetic knits. These items should
have more room to move in the water than
heavy items. (towels, jeans)
Loading
1 Detergent case 2 Adding fabric softener
If desired, add measured liquid fabric
softener to the softener inlet.
Pour liquid fabric softener into the
dispenser using the amount
recommended on the package.
Do not exceed the maximum fill line.
Overfilling can cause early dispensing of the
fabric softener which could stain clothes.
Do not open the detergent case when
water is supplied.
Avoid pouring fabric softener directly on
the clothes.
Adding detergent
Separate heavily soiled items from lightly soiled ones, even if they would normally be washed
together.
Separate dark colors from light colors, colorfast items from non-colorfast item.
Sorting
Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.
Color (White, Lignts, Darks) Separate white clothes from colored clothes.
Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately.
Main wash
Pre wash
Fabric softener