Daewoo 1012 Washer/Dryer User Manual


 
18
* QUICK 30
Note
If you want to change the setting during operation, press the Start/Hold button to hold the operation and
press the button you want.
Only Cold, 30 ˚C and 40 ˚C washing temperatures are selectable with Quick 30 program.
Only Rinse+ and Crease Care wash options are selectable with Quick 30 program.
Put the laundry in the drum. Put detergent and softener into the detergent case. Then
close the door.
Put detergent into the main wash and prewash compartments in the detergent
case. Softener should be below the MAX level.
Put detergent into the pre wash compartment only if you want to add prewash.
When you want to use bleach, put it into the main wash compartment with
detergent.
Press the Power button.
The LED shows only --- and all Program Lights turn on.
1
2
Select the Quick program using program selection dial.
Washing temperature 30 ˚C, spin 800 rpm and rinse 2 times are selected
automatically.
If you want to change the washing temperature, spin velocity or add wash options
(Rinse+, Crease Care), press each button.
3
Press Start/Hold button.
The Door is locked. By sensing the weight of laundry and supplying wash water,
The appliance starts washing.
4