Filter
Top Products
6
The following instructions will guide you through the initial steps of setting up your dryer.
Please note that every section of this manual provides important information regarding the preparation and use of
your dryer, and it is important that you review this entire manual before proceeding with any installation or use.
More detailed instructions concerning electrical connections, gas connections, and exhaust requirements are
provided in other parts of this manual.
Choose a location with a solid floor for your dryer.
Place the dryer in the desired location and make sure that it has the required clearances shown below.
* Most installations require a minimum
5 1/2 (5.5) inches.
(14 cm) clearance behind the dryer for the
exhaust vent with elbow.
PART 3
INITIAL STEPS FOR INSTALLING YOUR DRYER
40.2"
(102.1cm)
27"
(68.6cm)
44.3"
(112.5cm)
32.4"
(82.3cm)
NOTE:
Leveling legs should be secured.
All four legs should be stably placed on a solid and even floor.
If dryer is not level, laundry may not tumble properly and sensor will not detect humidity information accurately.
When leveling, please be cautious not to injure your fingers and toes.
If you install the dryer on the optional pedestal, it is necessary to level with the pedestal leveling legs.
STEP 1. Positioning the Dryer.