Filter
Top Products
Shiny Straight™ iron is a new styling too
l
which, with just a flick of a switch, transforms
into a straightener or a flocked straightener.
Now, you have the ability to create all types
of professional styling effects. Apart from
stunning new looks, you will find that a
straightener can be used for giving hair body,
and a flocked straightener is useful for
shaping and smoothing.
GENERAL INSTRUCTIONS
Before using Shiny Straight™ iron:
1. Plug in, leaving unit in the closed position
for fast heat up (It is best to always leave
closed when not in use).
2. After 6-7 minutes, Shiny Straight™ iron is
ready to use. Switch to the setting you desire.
3. Use Shiny Straight™ iron on dry hair.
You can use mousse, gel and other hair
preparations before or after using Shiny
Straight™ to achieve the look you desire.
4. You should only switch plates with Shiny
Straight™ iron in the closed position.
To switch plates, close the handles firmly and
slide the converter switch to the desired
straightening setting (See diagram 1).
5. You may wish to remove the center plate
for cleaning. If so, proceed as follows: Open
the appliance on the flocked setting and hold
it with the switch facing you. Depress (with
finger or thumbnail) the spring retainer on the
switch, slide the switch to the straightener
position, and lift out.