Filter
Top Products
Page 33
Automatic Computerized Drying Control
OPERATION OF CONTROL PANEL (continued)
(See drawing on page 33)
8. DRYING
Pressing this button changes the selection of automatic
or timed drying, indicated by a light.
9. COOLING
Pressing this button changes the selection of automatic
or timed cooling, indicated by a light. In auto cooling
mode, the cycle will end when the temperature falls
below 135°F.
10. REPEAT LAST CYCLE
Pressing this button before the start of a cycle will reset
all of the selections, temperatures, and times to what
they were at the beginning of the last cycle. Press
11. NON-REVERSING/REVERSING
Pressing this button changes the selection of Non-
reversing and Reversing.
12. LED DISPLAY
Shows cycle time or temperature. In automatic mode,
it shows the time used. In timed mode, it shows the
time remaining. When the DRYING
TEMPERATURE button is pressed and held down,
the drying temperature will be displayed. When the
DRYING TIME button is pressed and held down,
either the total drying time or “-A-” will be displayed
depending on whether auto or timed drying has been
selected. When the COOLING TIME button is
pressed and held down, either the total cooling time
or “-A-” will be displayed depending on whether auto
or timed cooling has been selected.
13. DRYING
Illuminated when in the drying cycle.
14. COOLING
Illuminated when in the cooling cycle.
15. END OF CYCLE
Illuminated at the end of the cycle.
16. OPEN DOOR
Illuminated when the door is open. START must be
pressed to restart the cycle after closing the door.
DRYING
COOLING
REPEAT LAST CYCLE
NON-REVERSING/
REVERSING
LED DISPLAY
DRYING
COOLING
END OF CYCLE
OPEN DOOR