Filter
Top Products
Page 33
Operating Instructions—Two Timer Models
OPERATING
INSTRUCTIONS—TWO
TIMER MODELS
OPERATING INSTRUCTIONS—TWO TIMER MODELS
(continued)
What is happening to the drying operation:
a. The fan motor will operate.
b. The basket will rotate.
c. The heat source will be energized.
d. The heated air will mix with the water washed
clothes to evaporate the moisture from the garments.
e. The thermostats will function to maintain a safe
temperature throughout the drying cycle.
f. The heat will be shut off and the motor will continue
to run to cool the dry load to a desired handling
temperature.
8. When the drying timer completes its time, then the cooling
timer will be energized and the cooling light will be “On”.
When the cooling timer completes its time, the cooling light
will stay “On” and the “End-of-Cycle” light will be “On”.
The “End-of-Cycle” light will go off when the “Start/Stop”
switch is turned “Off”. At the end of the cool-down cycle, the
clothes load is dry.
9. To shut the dryer “Off”, move the “Start/Stop” switch to the
“Stop” position. This switch is a safety switch to
immediately stop the dryer's operation.
Special Reversing Feature—Set the “Reversing/Non-
Reversing” switch to “Reversing”. See service manual for
setting of time of each reversal. Reversing of the basket is
designed for loads that twist (example—bed sheets and large
mixed loads). “Non-Reversing” is for small or medium-size
items that don't twist.