Filter
Top Products
22
4
Display information
The left display will indicate the temperature of the wash bath - in °C or °F (on
machines where this function has been selected).
The central display shows the remaining time to the end of the wash cycle.
For programs which are being run for the fi rst time, the machine will take a
theoretical time estimate. If this time indication does not correspond to the real
cycle time, the cycle time will be corrected from the second cycle onwards
(Self-Teaching function of the machine).
This function has to be specifi ed during preprogramming.
The right display will continue to show the selected program number.
If a "Level-stop" was programmed (which halts the programmer during the
fi lling of the cylinder) and/or a "Heat-stop" (which stops the programmer du-
ring the heating up of the wash bath, then the respective LED’s light up in the
display. Once the required water level and/or temperature have been reached,
the LED is turned off and the internal programmer advances again.
Wash cycle-LED’s
Each program segment has a corresponding LED. Each of these 6 LED’s light up
when the appropriate segment is executed. This way, the program sequence can
be accurately followed.
When a LED blinks, the machine is taking up water.
When a LED blinks slowly, the machine is heating up the water.
Spin-LED’s
When the water is drained at the at the end of a program segment and the machine
spins if so desired, the left spin-LED (intermediate spin) will light up together
with the cycle-LED.
- Functioning of the spin-LED’s during intermediate spin:
LED drain/distribution low spin coast
Interm. spin blinking rapidly continuously continuously
- Functioning of the spin-LED’s during gentle-intermediate spin:
LED drain/distribution low spin coast
Interm. spin blinking rapidly blinking slowly blinking slowly
During fi nal spin, both the left spin-LED (intermediate spin) will light up together
with the right spin-LED.
- Functioning of the spin-LED’s during fi nal spin:
LED drain/distribution low spin high spin coast tumble
Interm. spin blinking rapidly continuously slowly continuously off
Final spin continuously continuously slowly continuously rapidly
- Functioning of the spin-LED’s during gentle-fi nal spin:
LED drain/distribution low spin high spin coast tumble
Interm. spin blinking rapidly slowly ---- slowly off
Final spin continuously continuously ---- continuously rapidly
Indications of program
sequence