Filter
Top Products
14
Changing Harness Strap Slots:
A Loosen harness straps:
Pull and hold upper belt tab.
Pull harness straps out.
B Remove both harness strap loops from
Splitter Plate on back of car seat.
C Change harness strap slots.
Make sure harness straps are threaded
through matching slot of seat pad and
car seat.
It may be necessary to remove seat pad
from top of car seat.
D Re-attach harness strap loops to Splitter
Plate (fig. e):
• For Infants or Small Toddlers:
Put Top right strap loop on Splitter
Plate first, then attach Top left strap
loop.
NOTE: Make sure ends of straps are
in front of Splitter Plate as shown.
• For Toddlers:
Put Bottom right strap loop on Splitter
Plate first, then attach Bottom left strap
loop.
NOTE:
• Make sure both strap loops are securely
attached within Splitter Plate hook.
• Make sure strap is NOT twisted and
is routed between adjuster lever and
car seat shell (fig. f).
7
OPERATIONS and ADJUSTMENTS (continued)