EN
19
6.5 CLEANING THE DETERGENT DRAWER
The detergent drawer should be kept clean, removing all solid deposits.
To simplify this operation, completely remove the detergent drawer (pull the
drawer fully out, press in the zone marked PUSH and then remove com-
pletely).
Remove the siphon "A" and clean all parts with hot water.
Fully re-insert the siphon and remove any detergent deposits before putting
the drawer back in position.
.
6.6 CLEANING THE WATER INTAKE FILTERS
The machine is fitted with a filter which protects the water intake valves.
The filter is in the fitting on the intake hose which is connected to the tap
The filter must be cleaned if the washer-dryer is not taking in water or the amount of wa-
ter is insufficient.
To clean, proceed as follows:
• Remove the mains plug to disconnect the appliance from the electricity
supply.
• Turn off the water tap.
• Unscrew the intake hose fitting from the tap.
• Remove the intake hose fitting filter.
• Clean the filter with water, with the aid of a small brush.
• When screwing the intake hose fitting back into place, check that the filter is positioned correctly.