Candy CN105T Washer User Manual


 
PROGRAMME Selector
Note: never turn the dial anti-clockwise (Turn it
clockwise and do not press the on/off button before
selecting the programme.)
The tables in the washing section describe the various programmes and give the number or
symbol to select for them.
IMPORTANT : IF YOU NEED TO CHANGE A PROGRAMME THAT
HAS ALREADY STARTED – SWITCH OFF THE MACHINE BY THE
ON / OFF BUTTON AND THEN MOVE THE PROGRAMME DIAL
TO THE CORRECT POSITION. IF YOU DO NOT PRESS “OFF”
BEFOREHAND, THE DIAL WILL AUTOMATICALLY MOVE TO ITS
INITIAL POSITION.
WASH TEMPERATURE selector
Can be turned in either direction
This washing machine is equipped with this device for
setting the wash temperature you want. We recommend
that the temperature shown on the label inside garments
should never be exceeded.
The most suitable temperature and cycle for each type of
fabric is shown in the programme guide.
To protect fabrics, if the variable temperature dial has
accidentally been set too high than stated in the
programme guide, the machine will lower the temperature automatically.
L
I
9
EXTRA RINSE button
This function will allow an extra rinse or more water added at the rinse stage – depending on
the programme selected. This is particularly important for avoiding skin irritation from
detergent residues for people with particularly sensitive skin.
The extra rinse button is also recommended when washing heavily soiled fabrics, requiring
the use of a lot of detergent, or when washing items made of towelling, whose fibres have a
greater tendency to retain detergent.
E
8
EASY IRON button
The EASY IRON function minimizes creases as much as possible with a uniquely designed
anti-crease system that is tailored to specific fabrics.
MIXED FABRICS - the water is gradually cooled throughout the final two rinses with no
spinning and then a delicate spin assures the maximum relaxation of the fabrics.
DELICATE FABRICS – final two rinses with no spinning and then the fabrics are left in water
until it is time to unload. When you are ready to unload, press the EASY IRON button – this
will drain and spin ready for emptying
RESISTANT FABRICS AND WOOLLENS - at the end of the final rinse, the fabrics are left in
water until it is time to unload. When you are ready to unload, press the EASY IRON button –
this will drain and spin ready for emptying
If you do not want to spin the clothes and activate drain only :
Turn the appliance off by pressing the on / off button
Select Programme Z
Switch on the appliance again by pressing the on / off button
D