Filter
Top Products
6
1.Turn the steam regulator
4
to the position
«
•
» (= steam off).
2.Fill the water tank to the marking «max.»
L
and turn the temperature selector
1
to the
●●●
marking («self-cleaning» = SC) (A).
3.Plug the iron into the socket and wait till the
green pilot light
7
goes off.
4.Unplug the iron and hold it over a sink.
5.Turn the steam regu-
lator
4
clockwise to
the end of the red
marking (B) and then
6.keep turning it to the
double-arrow marking
. The steam regu-
lator will lift (C).
7.Pull out the steam
regulator together with
the valve vertically
(D). Do not touch the
lower end of the anti-
calc. valve with your
fingers, to avoid a
possible greasy film.
8.Allow all water to drain
through the steam
vents in the sole plate,
while shaking the iron slightly. (Caution: Hot
water and steam come out from the sole
plate.)
9.Wait for the sole plate to cool down and then
clean it (see «Maintenance and Cleaning»).
10.Make sure that the sole plate is completely dry
before storing it.
Cleaning the anti-calc. valve on the steam
regulator
During the time the sole plate is cooling down we
recommend to decalcify the anti-calc. valve in
the following way:
1. Put a small quantity of
white vinegar
(not vinegar essence)
or lemon juice into a
glass or bowl.
2. Immerse just the bot-
tom part of the valve in
the liquid, wait till it is
decalcified and care-
fully brush of remain-
ing residue (E). Do not use a metal brush.
3. Then, rinse it under running water without
touching the lower end of the valve.
Re-inserting the steam regulator with anti-calc.
valve
1. Re-insert the steam regulator so that the
double-arrow aligns with the marking on
the iron (F).
2. Then push it down carefully and at the same
time turn the button anti-clockwise.
3. Keep turning the button
to the marking «
•
»
(= steam off).
4. Refill the tank with
water, heat the iron up
and press the button
6
3 to 4 times in the shot
of steam function
before ironing, to rinse
the iron.
ATTENTION: The iron must not be used without
the steam regulator and the anti-calc. valve.
Ironing Guide
To begin ironing, it is best to start with fabrics
requiring a lower temperature (e. g. synthetics),
and continue with those requiring a higher
temperature (e. g. cotton, linen). Silk and silk-like
synthetics tend to waterspot, therefore before
using the water spray feature, test it on an
inconspicuous spot first.
Mixed fabrics: Always select the temperature
suited for the most sensitive fibre the garment
contains. Follow manufacturer’s instructions on
the label.
Subject to chance without notice.
This product conforms to the
EMC-Requirements as laid down by
the Council Directive 89/336/EEC.
Fabrics Temperature
regulator
setting
Steam
regulator
setting
Synhetics
(acrylic, acetate)
●
•
(= steam off)
Silk, rayon,
nylon, polyester,
cotton blends
●●
•
(= steam off)
to max.
Wool
●●
•
(= steam off)
to max.
Cotton
●●●
•
(= steam off)
to max.
Linen
●●●
to max.
•
(= steam off)
to max.
7
Guarantee
We grant a 1 year guarantee on the product
commencing on the date of purchase.
Within the guarantee period we will eliminate,
free of charge, any defects in the appliance
resulting from faults in material or workmanship
either by repairing, or exchanging parts or
exchanging the whole appliance as we may
choose.
Not covered by this guarantee: damage arising
from improper use or storage (operation with
incorrect current/voltage, plugging it into an
unsuitabie power point, breakage use of
commercial decalcifyers, wet storage on the
ironing surface), normal wear and defects which
have a negligible effect on the value or operation
of the appliance.
The guarantee becomes void if repairs are
undertaken by unauthorised persons and if
original Braun parts are not used.
The guarantee only comes into force if the date
of purchase is confirmed by the dealer's stamp
and signature on the guarantee card and
registration card.
This guarantee extends to every country where
this appliance is supplied by Braun or its
appointed distributor and where no import
restrictions or other legal regulations hinder or
prevent service being given under guarantee.
Service under the guarantee does not affect the
expiry date of the guarantee. The guarantee on
parts or entire appliances which are exchanged
ends when the guarantee on this appliance
expires.
In the event of a claim under this guarantee,
hand in the complete appliance with the valid
guarantee card to your dealer, or send both to
the nearest Braun Customer Service Centre.
All other claims including for damages resulting
from this guarantee are excluded unless our
liability is legally mandatory.
Those claims arising out of the sales contract
with the vendor are not affected by this
guarantee.
For UK only:
This guarantee in no way affects your rights
under statutory law.