Blomberg WNF 9402 C20 Washer User Manual


  Open as PDF
of 28
 
10 - EN
programhasstartedandisstillcontinuing
fadesout.
Selecting or canceling an auxiliary
function in pause mode
Auxiliaryfunctionscanbecancelledor
selectedinaccordancewiththestepthe
programisat.
Adding/removing laundry in pause mode
Thedoorcanbeopenedifthewaterlevelis
suitable.Thedoorlockedsymbolwilllight
upuntilthedoorissuitableforopening.This
symbolwillfadeoutassoonasthedooris
allowedtoopen.Laundrymaybeadded/
takenoutbyopeningthedoor.
Door lock
TheDoorLockedSymbollightsupwhenthe
loadingdoorislocked.Thissymbolwillflash
untilthedoorisallowedtoopen.Donotforce
thedooratthisstage.Thissymbolwillfade
outassoonasthedoorisallowedtoopen.
Youmayopenthedoorafterthesymbolfades
out.
Child-proof lock
Protecttheappliancefrombeingtampered
bychildrenbymeansofthechild-prooflock.
Inthiscase,nochangecanbemadeinthe
runningprogram.
C
Yourmachinecanbeturnedonandoff
withOn/Offbuttonwhilethechild-proof
lockisactivated.Inthiscase,yourmachine
willresumeitsprogramwithchild-proof
lockactivated.
Themachineisswitchedtochild-lockby
pressingthe2ndand4thauxiliaryfunctions
for3sec.“C:on”(Child-prooflockisactivated)
labelappearsonthedisplay.
Thesamesymbolwillalsobedisplayed
wheneveranybuttonispressedwhilethe
machineischild-locked.
Todeactivatethechild-prooflock,pressthe
2ndand4thauxiliaryfunctionbuttonsfor3
sec.
“C:OFF”(Child-prooflockisdeactivated)label
appearsonthescreen.
Ending the program through canceling
“Start/Pause/Cancel”buttonispressedfor3
secondstocanceltheprogram.Startsymbol
willflashduringcancellation.Aftercancellation,
thesymbolofthecorrespondingstepatwhich
thecancellationwasmadewillremainlitand
“End”willappearonthescreen.
End of program
Whentheprogramisfinished,thesymbols
oftherelevantstepswillremainlitupand
theauxiliaryfunction,spinandtemperature
dataselectedatthestart-upoftheprogram
willremainselected.“End”willappearonthe
display.
 previous next