Blomberg WNF 8402 Washer User Manual


  Open as PDF
of 71
 
11
EN
C
Thisisnotawashingprogramme.Itisa
maintenance programme.
C
Donotruntheprogrammewhenthereis
somethinginthemachine.Ifyoutrytodo
so, the machine detects that there is a load
insideandabortstheprogramme.
Special programmes
For specific applications, select any of the
following programmes.
• Rinse
Usethisprogrammewhenyouwanttorinseor
starch separately.
• Spin + Drain
Usethisprogrammetoapplyanadditionalspin
cycle for your laundry or to drain the water in the
machine.
Beforeselectingthisprogramme,selectthe
desired spin speed and press Start / Pause /
Cancelbutton.Themachinewillspinthelaundry
with the set spin speed and drain the water
coming out of them.
Ifyouwishtodrainonlythewaterwithout
spinningyourlaundry,selectthePump+Spin
programme and then select the No Spin function
withthehelpofSpinSpeedAdjustmentbutton.
PressStart/Pause/Cancelbutton.
C
Usealowerspinspeedfordelicatelaundries.
Temperature selection
Whenever a new programme is selected,
the maximum temperature for the selected
programme appears on the temperature indicator.
To decrease the temperature, press the
TemperatureAdjustmentbutton.Temperature
decreaseswithincrementsof10°andfinally,“-”
symbolindicatingthecoldwashoptionappears
on the display.
C
Ifyouscrolltocoldwashoptionandpress
TemperatureAdjustmentbuttonagain,the
recommended temperature for the selected
programme appears on the display. Press
theTemperatureAdjustmentbuttonagainto
decrease the temperature.
Economy symbol
Indicatestheprogrammesandtemperaturesthat
provide energy savings.
C
Economysymbolcannotbeselectedin
IntensiveandHygieneprogrammessince
washing is performed in long times and
at high temperatures in order to provide
hygiene.Similarly,Economysymbolcannot
beselectedinBaby,Refresh,DrumCleaning,
Spin and Rinse programmes as well.
Spin speed selection
Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the spin speed
indicator.
To decrease the spin speed, press the Spin
SpeedAdjustmentbutton.Spinspeeddecreases
gradually. Then, depending on the model of the
product,"RinseHold"and"NoSpin"options
appear on the display. See "Auxiliary function
selection" section for explanations of these
options.
C
RinseHoldoptionisindicatedwith“ ”
symbolandNoSpinoptionisindicatedwith“
”symbol.
 previous next