Filter
Top Products
23
EN
5. At the end of the countdown, duration
of the selected programme will be
displayed. “_” symbol will disappear
and the selected programme will
start.
Changing the Delayed Start period
If you want to change the time during
countdown:
1. Press Delayed Start button. Time will
increase by 1 hour each time you
press the button.
2. If you want to decrease the delayed
start time, press Delayed Start button
repeatedly until the desired delayed
start time appears on the display.
Canceling the Delayed Start function
If you want to cancel the delayed start
countdown and start the programme
immediately:
1. Set the Delayed Start period to zero
or turn the Programme Selection knob
to any programme. Thus, Delayed
Start function will be canceled. The
End/Cancel light flashes continuously.
2. Then, select the programme you want
to run again.
3. Press Start / Pause button to start the
programme.
Starting the programme
1. Press Start / Pause button to start the
programme.
2. Programme follow-up light showing
the startup of the programme will turn
on.
C
If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
machine will switch to Pause mode
and the illumination level of the
temperature, speed and loading
door indicator lights will decrease.
Other indicator lights and indicators
will turn off. Once the Programme
Selection knob is rotated or any
button is pressed, indicator lights and
indicators will turn on again.
Child Lock
Use Child Lock function to prevent
children from tampering with the machine.
Thus you can avoid any changes in a
running programme.
C
If the Programme Selection knob is
turned when the Child Lock is active,
"Con" appears on the display. The
Child Lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary
functions.
C
Even if another programme is selected
with the Programme Selection
knob while the Child Lock is active,
previously selected programme will
continue running.
To activate the Child Lock:
Press and hold 1
st
and 2
nd
Auxiliary
Function buttons for 3 seconds. The
lights on the 1
st
and 2
nd
Auxiliary Function
buttons will flash, and "C03", "C02", "C01"
will appear on the display respectively
while you keep the buttons pressed for 3
seconds. Then, "Con" will appear on the
display indicating that the Child Lock is
activated. If you press any button or turn
the Programme Selection knob when the
Child Lock is active, same phrase will
appear on the display. The lights on the
1st and 2nd auxiliary function buttons that
are used to deactivate the Child Lock will
blink 3 times.
To deactivate the Child Lock:
Press and hold 1
st
and 2
nd
auxiliary
function buttons for 3 seconds while any
programme is running. The lights on the
1
st
and 2
nd
Auxiliary Function buttons
will flash, and "C03", "C02", "C01" will
appear on the display respectively while
you keep the buttons pressed for 3
seconds. Then, "COFF" will appear on the
display indicating that the Child Lock is
deactivated.
C
In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On
/ Off position when no programme
is running, and select another
programme.
C
Child Lock is not deactivated after
power failures or when the machine is
unplugged.
Progress of programme
Progress of a running programme can
be followed from the Programme Follow-
up indicator. At the beginning of every
programme step, the relevant indicator
light will turn on and light of the completed
step will turn off.