Blomberg WNF 5441 AE20 Washer User Manual


  Open as PDF
of 72
 
13
EN
Auxiliary function selection
Selectthedesiredauxiliaryfunctionsbeforestarting
the programme. Furthermore, you may also select
orcancelauxiliaryfunctionsthataresuitabletothe
runningprogrammebypressingtheStart/Pause
/Cancelbuttonwhenthemachineisoperating.
Forthis,themachinemustbeinastepbeforethe
auxiliary function you are going to select or cancel.
Dependingontheprogramme,pressa,b,cor
dbuttonstoselectthedesiredauxiliaryfunction.
Symboloftheselectedauxiliaryfunctionappearson
the display.
C
Somefunctionscannotbeselectedtogether.
Ifasecondauxiliaryfunctionconflictingwith
thefirstoneisselectedbeforestartingthe
machine,thefunctionselectedfirstwillbe
canceled and the second auxiliary function
selection will remain active. For example,
if you want to select Quick Wash after you
haveselectedthePrewash,Prewashwillbe
canceled and Quick Wash will remain active.
C
Anauxiliaryfunctionthatisnotcompatible
withtheprogrammecannotbeselected.(See
"Programmeandconsumptiontable")
C
AuxiliaryFunctionbuttonsmayvaryaccording
to the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
F1 appears on the display when you select this
function (a).
• Quick Wash
ThisfunctioncanbeusedinCottonsandSynthetics
programmes.Itdecreasesthewashingtimesand
alsothenumberofrinsingstepsforlightlysoiled
laundry.
F2 appears on the display when you select this
function(b).
C
When you select this function, load your
machine with half of the maximum laundry
specifiedintheprogrammetable.
• Rinse Plus
Thisfunctionenablesthemachinetomakeanother
rinsing in addition to the one already made after the
mainwash.Thus,theriskforsensitiveskins(babies,
allergicskins,etc.)tobeeffectedbytheminimal
detergentremnantsonthelaundrycanbereduced.
F3 appears on the display when you select this
function (c).
• Anti-Creasing
This function creases the clothes lesser when they
arebeingwashed.Drummovementisreducedand
spinningspeedislimitedtopreventcreasing.In
addition, washing is done with a higher water level.
F4 appears on the display when you select this
function (d).
• Rinse Hold
Ifyouarenotgoingtounloadyourclothes
immediately after the programme completes, you
may use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in the
machine.PressStart/Pause/Cancelbuttonafter
this process if you want to drain the water without
spinning your laundry. Programme will resume and
complete after draining the water.
Ifyouwanttospinthelaundryheldinwater,adjust
the Spin Speed and press Start / Pause / Cancel
button.
The programme resumes. Water is drained, laundry
is spun and the programme is completed.
• Soaking
TheSoakingauxiliaryfunctionensuresbetter
removalofstainsingrainedintotheclothesby
holding them in the detergent water prior to startup
of the programme.
Time display
Remaining time to complete the programme
appears on the display while the programme is
running. Tim is displayed as “01:30” in hours and
minutes format.
C
Programme time may differ from the values
in the "Programme and consumption
table"dependingonthewaterpressure,
waterhardnessandtemperature,ambient
temperature, amount and the type of laundry,
auxiliary functions selected and the changes at
the mains voltage.
Delayed start
WiththeDelayedStartfunctionthestartupof
theprogrammemaybedelayedupto24hours.
Delayedstarttimecanbeincreasedbyincrements
of 30 minutes.
C
Donotuseliquiddetergentswhenyouset
DelayedStart!Thereistheriskofstainingofthe
clothes.
Opentheloadingdoor,placethelaundryandput
detergent, etc. Select the washing programme,
temperature,spinspeedand,ifrequired,the
auxiliary functions. Set the desired delayed start
timebypressingtheDelayedStart+or-buttons.
DelayedStartsymbolflashes.PressStart/Pause
/Cancelbutton.Delayedstartcountdownstarts.
DelayedStartsymbolilluminatessteadily.Start
symbolappears.“:”signinthemiddleofthe
delayed start time on the display starts flashing.
C
Additionallaundrymaybeloadedduring
the delayed start period. At the end of the
countdown,DelayedStartsymboldisappears,
washing cycle starts and the time of the
selected programme appears on the display.
Changing the delayed start period
Ifyouwanttochangethetimeduringcountdown:
PressStart/Pause/Cancelbutton.“:”signinthe
middle of the delayed start time on the display stops
flashing.Pausesymbolappears.DelayedStart
symbolflashes.Startsymboldisappears.Setthe
desireddelayedstarttimebypressingtheDelayed
Start+or-buttons.PressStart/Pause/Cancel
button.DelayedStartsymbolilluminatessteadily.
Pausesymboldisappears.Startsymbolappears.
“:” sign in the middle of the delayed start time on the
 previous next