Blomberg WE20 Washer User Manual


  Open as PDF
of 71
 
14
EN
display starts flashing.
Canceling the Delayed Start function
Ifyouwanttocancelthedelayedstartcountdown
and start the programme immediately:
PressStart/Pause/Cancelbutton.“:”signinthe
middle of the delayed start time on the display stops
flashing.Startsymboldisappears.Pausesymbol
andDelayedStartsymbolflashes.Decreasethe
delayedstarttimebypressingtheDelayedStart
-button.Programmedurationappearsafter30
minutes.PressStart/Pause/Cancelbuttonto
start the programme.
Starting the programme
PressStart/Pause/Cancelbuttontostartthe
programme.Startsymbolshowingthestartupof
the programme will turn on. Loading door is locked
andDoorLockedsymbolappearsonthedisplay.
Thesymbolofthestepfromwhichtheprogramme
has started appears on the display (Prewash, Main
Wash, Rinse, Softener and Spin).
Progress of programme
Progress of a running programme is indicated on
thedisplaywithasetofsymbols.
Relevantsymbolappearsonthedisplayat
thebeginningofeachprogrammestepandall
symbolsremainlitattheendoftheprogramme.
Thefarthermostrightsymbolindicatesthecurrent
programme step.
Prewash
IfthePrewashauxiliaryfunctionisselected,
Prewashsymbolappearsonthedisplayindicating
that the prewash step has started.
Main Wash
MainWashsymbolindicatingthatthemainwash
step has started appears on the display.
Rinse
Rinsesymbolindicatingthattherinsingstephas
started appears on the display.
Softener
Softenersymbolindicatingthatthesoftenerstep
has started appears on the display.
Spin
Appearsatthebeginningofthefinalspinstep
and remains lit during Spin and Pump special
programmes.
C
Ifthemachinedoesnotpasstothespinning
step,RinseHoldfunctionmightbeactiveorthe
automaticunbalancedloaddetectionsystem
mightbeactivatedduetotheunbalanced
distributionofthelaundryinthemachine.
Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases
whenthewaterlevelisunsuitable.
DoorLockedsymbolappearswhentheloading
doorislocked.Thissymbolwillflashuntilthe
loadingdoorbecomesreadytoopenwhen
programme completes or the machine is paused.
Donotforcetoopentheloadingdoorinthisstep.
Symboldisappearswhenthedoorisreadyto
open.Youcanopenthedoorwhenthesymbol
disappears.
Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pause/Cancelbuttontoswitch
themachinetopausemode.Pausesymbol
appears on the display indicating that the machine
ispaused.Startsymboldisappears.
Changing the speed and temperature
settings for auxiliary functions
Dependingonthesteptheprogrammehas
reached, you may cancel or activate the auxiliary
functions; see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
Adding or taking out laundry
PresstheStart/Pause/Cancelbuttontoswitch
the machine to pause mode. The programme
follow-uplightoftherelevantstepduringwhichthe
machine was switched into the pause mode will
flash. WaituntiltheLoadingDoorcanbeopened.
OpentheLoadingDoorandaddortakeoutthe
laundry.ClosetheLoadingDoor.Makechangesin
auxiliary functions, temperature and speed settings
ifnecessary.PressStart/Pause/Cancelbuttonto
start the machine.
C
The loading door will not open if the water
temperature in the machine is high or the water
levelisabovethedooropening.
Child Lock
UseChildLockfunctiontopreventchildrenfrom
tampering with the machine. Thus you can avoid
any changes in a running programme.
C
You can switch on and off the machine with
On/OffbuttonwhentheChildLockisactive.
When you switch on the machine again,
programme will resume from where it has
stopped.
To activate the Child Lock:
Press and hold 2
nd
and 4
th
AuxiliaryFunctionbuttons
for 3 seconds. “Con” appears on the display.
C
Same phrase will appear on the display if you
pressanybuttonwhenChildLockisenabled.
To deactivate the Child Lock:
Press and hold 2
nd
and 4
th
AuxiliaryFunctionbuttons
for3seconds.“COFF”appearsonthedisplay.
C
Donotforgettodisablethechildlockatthe
endoftheprogrammeifitwasenabledbefore.
Otherwise,machinewillnotallowtoselecta
new programme.
Canceling the programme
PressandholdStart/Pause/Cancelbuttonfor3
seconds.Startsymbolflashes.Symbolofthestep
at which the programme was cancelled remains lit.
"END" appears on the display and the programme
is cancelled.
 previous next