Filter
Top Products
22 - EN
Sensor
There are humidity sensors in your machine
that detect whether the laundry is dry or not.
For sensor cleaning;
1. Open loading door.
2. Allow machine to cool off if drying has been
done recently.
3. Wipe the metal sensors with a soft cloth
dampened with vinegar and dry the sensors
afterwards.
C Clean the metal sensors at regular
intervals(4timesayear).
A Never use solvents, cleaning agents
or similar substances when cleaning
as these might cause fire and/or an
explosion!
Lint filter
Lint and fibers released from the laundry in to
the air during the drying cycle are collected in
the“LintFilter”.
C Fibres and lint are formed during wearing
and washing.
A Always clean the filter after each drying
cycle.
To clean the Filter;
1. Open loading door.
2.Removethelintfilterbypullingitupand
open the filter.
3. Clean lint, fiber, and by hand or with a soft
piece of cloth.
4. Close the filter and put it back in place.
C Youcancleanthefilterandfilterareawith
a vacuum cleaner.
C Clogging may arise on the filter surface
after using your machine for some time; if
this occurs, wash the filter with water and
dry it before using again.
6 Maintenance and cleaning