Do not use
bleach
Washing
temperature
Can be washed
at centrifugal
machine
Do not wash
centrifugal
machine
Dry on horizantal
surface
Warm iron
Bleach can
be used
Do not machine
wash
Line dry
Descriptions of the international textile care label (ITCL) symbols
60°
No spin
No dry cleaning
You turned the machine on, but the LEDs do not light
up on the panel.
Check that the power cord is plugged in and power is
turned on or a blown fuse. Check the front in closed
properly closure.
Machine does not take water.
Check the front door for proper closure. Either taps are
closed or water intake filters are clogged.
Taken water is directly discharged.
Check if the discharge hose placed as described in the
users manual or not.
Water coming from beneath the machine.
Check the water intake and drain hoses. Tighten the connections.
The washers of the hoses may be worn out. If non of the two,
the pump filter is not closed properly.
Foam coming out of the detergent dispenser.
Check whether your detergent is suitable for FRONT LOAD machines.
Next time use less detergent.
Pump does not drain water.
Clean the pump filter. Check whether the drain hose is bent or
not. If there is need to clean the pump filter, refer to the pump
filter cleaning section of the manual.
Chemicals can
be used
Do not wash Dry clean
P A
Iron permitted Do not iron
Before calling service
Part 7:
19