Black & Decker X1600/X2000 Iron User Manual


 
6
ENGLISH
Using as a dry iron
Stand the appliance on its heel rest (12).
Plug the appliance in and switch on.
Set the steam control (5) to the no steam
position.
Adjust the temperature control dial (9) to the
required setting.
The heating light (10) will switch off when the
appliance has reached the required
temperature.
Using as a steam iron
Fill the water steam tank as described
above.
Stand the appliance on its heel rest (12).
Adjust the temperature control dial (9) to the
required steam setting.
The heating light (10) will switch on. When the
heating light switches off, the iron will be ready
for use as a steam iron.
The heating light will regularly switch on and off
whilst ironing.
To create steam, set the steam control (5) to
the required steam position.
= Low steam
= High steam
Plug the appliance in and switch on.
Using the steam burst button
The steam burst feature can only be used whilst
ironing on a high temperature setting.
Make sure that there is water in the tank and
the temperature control dial (9) is set to the
high steam position.
Lift the appliance and press the steam burst
button (6). You may need to press a few
times to activate the pump.
Using the spray button
The spray feature can be used at any
temperature setting when either steam or dry
ironing.
Make sure that there is water in the water
tank.
Press the spray button (2) several times to
activate the pump while you are ironing.
Cleaning and maintenance
Before cleaning and maintenance, remove the
plug from the socket and allow the appliance to
cool.
Self Clean
The self-clean function must be used before
using the appliance for the rst time and then
regularly to remove scale.
Fill the tank to the maximum lling level.
Set the temperature control dial (9) to the
max position.
Plug the appliance in and switch on.
Allow the appliance to heat up until the
heating light (10) switches off and then on
again.
Unplug the appliance and hold it horizontally
over the sink.
Press the self-clean button (8)
Warning! Hot water and steam will come out of
the vents. Impurities and scale will be washed
away.