Black & Decker X1060 Iron User Manual


 
-4-
English
Using your appliance
• Always take care when using the appliance.
• Do not use the appliance outdoors.
• Do not operate the appliance if your hands are wet.
• Do not operate the appliance if you are barefoot.
• Guide the power supply cord neatly so it does not hang over the edge of a worktop and
cannot be caught accidentally or tripped over.
• Never pull the power supply cord to disconnect the plug from the socket- Keep the power
supply cord away from heat, oil and sharp edges.
• If the power supply cord is damaged during use, disconnect the appliance from the power
supply immediately. Do not touch the power supply cord before disconnecting from the
power supply.
• Disconnect the appliance from the power supply when not in use and before cleaning.
Safety of others
• Do not allow children or any person unfamiliar with these instructions to use the appliance.
• Do not allow children or animals to come near the work area or to touch the appliance or
power supply cord. Close supervision is necessary when the appliance is used near
children.
After use
• Switch off, remove the plug from the socket and let the appliance cool down before leaving
it unattended and before changing, cleaning or inspecting any parts of the appliance.
• When not in use; the appliance should be stored in a dry place- Children should not have
access to stored appliances.
Inspection and repairs
• Before use, check the appliance for damaged or defective parts- Check for breakage of
parts, damage to switches and any other conditions that may affect its operation.
• Do not use the appliance if any part is damaged or defective.
• Have any damaged or defective parts repaired or replaced by an authorised repair agent.
• Before use, check the power supply cord for signs of damage, ageing and wear.
• Do not use the appliance if the power supply cord or mains plug is damaged or defective.
• If the power supply cord or mains plug is damaged or defective it must be repaired by an
authorised repair agent in order to avoid a hazard- Do not cut the power supply cord and
do not attempt to repair it yourself.
• Never attempt to remove or replace any parts other than those specified in this manual.
Electrical Safety
This product must be earthed- Always check that the power supply corresponds to
the voltage on the rating plate
Extension cables & class 1 product
• A 3-core cable must be used as your appliance is earthed and of class 1 construction.
• Up to 30m(100 ft) can be used without loss of power.
• This appliance is not intended for use by young or infirm person without supervision.
Children must be supervised to ensure they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer or an authorised
Black & Decker Service Centre in order to avoid a hazard.