Filter
Top Products
18 / EN
Washing Machine / User’s Manual
Discharging the water when the product does not
have an emergency draining hose:
a Place a large container in front of the filter to catch water
from the filter.
b Loosen pump filter (anticlockwise) until water starts to
flow. Fill the flowing water into the container you have
placed in front of the filter. Always keep a piece of cloth
handy to absorb any spilled water.
c When the water inside the machine is finished, take out
the filter completely by turning it.
4 Clean any residues inside the filter as well as fibers, if
any, around the pump impeller region.
5 Install the filter.
6 If the filter cap is composed of two pieces, close the filter
cap by pressing on the tab. If it is one piece, seat the tabs
in the lower part into their places first, and then press the
upper part to close.
Indicative values for Synthetics programmes (EN)
Load (kg)
Water
Consumption (l)
Energy
Consumption
(kWh)
Programme
Duration (min) *
Remaining Moisture
Content (%) **
Remaining Moisture
Content (%) **
≤ 1000 rpm > 1000 rpm
Synthetics 60
4 65 1.13 01:45 45 40
Synthetics 40
4 65 0.90 01:31 45 40
* You can see the washing time of the programme you have selected on the display of the machine. It is normal that small
differences may occur between the time shown on the display and the real washing time.
** Remaining moisture content values may differ according to the selected spin speed.
Duvet
(Bedding)
Mixed 40
(Mix40)
Shirts
Spin
Super short
express
Daily
express
Dark wash
(Darkcare)
Dark wash
(Darkcare)
Hand
Wash
BabyProtectCotton
Eco
Cottons
Synthetics
Woollens
RinseDrain
(Pump)
Freshen
up
Pre-wash
Night modeQuick
wash
Extra rinse
(Rinse Plus)
Time delay
Delicate 20° Hygiene 20°40° 40’
Automatic Programme
Silk+Hand washSteamFinishing Protection BabyProtect+
Sports
Pet hair
removal