Filter
Top Products
16 / EN
Washing Machine / User’s Manual
Indicative values for Synthetics programmes (EN)
Load (kg)
Water
Consumption (l)
Energy
Consumption
(kWh)
Programme
Duration (min) *
Remaining Moisture
Content (%) **
Remaining Moisture
Content (%) **
≤ 1000 rpm > 1000 rpm
Synthetics 60
3 52 1.20
105
l
/135
l
45 40
Synthetics 40
3 48 0.83
105
l
/135
l
45 40
* You can see the washing time of the programme you have selected on the display of the machine. It is normal that
small differences may occur between the time shown on the display and the real washing time.
** Remaining moisture content values may differ according to the selected spin speed.
• Mix 40
Use this programme to wash your cotton and synthetic clothes together without sorting them.
• Aqua 40’ 40°
Use this programme to wash your lightly soiled and unstained cotton laundry in a short time.
• Sports & Outdoor
Use this programme to wash your garments that are worn for a short time such as sportswear. It is suitable to
wash little amount of cotton / synthetic blended garments.
• Hygiene 20°
Use this programme for your laundry for which you require washing at lower temperature with intensive and
long washing cycle. Use this programme for your laundry for which you require hygienic washing at lower
temperature.
• Rinse
Use when you want to rinse or starch separately.
• Spin + Drain
Use to drain the water in the machine.
4.3.4 Temperature selection
Whenever a new programme is selected, the recommended temperature for the selected programme appears
on the temperature indicator.
To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually.
C
If the programme has not reached the heating step, you can change the temperature without switching the machine to
Pause mode.
4.3.5 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display. See
"Auxiliary function selection" section for explanations of these options.
C
If the programme has not reached the spinning step, you can change the speed without switching the machine to Pause
mode.