Beko WMY8068LB1 Washer User Manual


 
32 / EN
Washing Machine /User’s Manual
Operating the product
To deactivate the childproof lock:
Press and hold Auxiliary Function button 2
for 3 seconds. After the countdown as “CL 3-2-
1” on the display is over, "Child Lock Enabled"
disappears from the display.
5.17 Canceling the programme
The programme is cancelled when the machine is
turned off and on again. Press and hold On / Off
button for 3 seconds. After the countdown as "3-
2-1" on the display is over, the machine turns off.
C
If you press On / Off button when the
Child Lock is enabled, the programme
will not be cancelled. You should cancel
the Child Lock first.
C
If you want to open the loading door after
you have cancelled the programme but it
is not possible to open the loading door
since the water level in the machine is
above the loading door opening, then
turn the Programme Selection
knob to Pump+Spin programme and
discharge the water in the machine.
5.18 End of programme
End symbol appears on the display when the
programme is completed.
If you do not press any button for 10 minutes, the
machine will switch to OFF mode. Display and all
indicators are turned off.
Completed programme steps will be displayed if
you press On / Off button.
5.19 Adjusting the VOLUME level
Low volume and high volume
Press and hold Auxiliary Function button 3 for
3 seconds to adjust the volume level. After the
countdown as "3-2-1" on the display is over,
the volume level symbol will appear and the new
volume level will be displayed.
5.20 Memory program setting
You can create a favourite programme by saving
frequently used programme and other settings.
Use this function when you want to select quickly
the same settings you use for the laundry that you
wash regularly.
Memory programme will remain at the factory
set programme until you make a new favourite
programme setting.
To store a new Memory programme:
1 Select the desired programme, temperature,
spin speed, soiling degree and auxiliary
function.
2 Keep the Memory button pressed for 3
seconds.
3 Countdown as "3-2-1" appears on the display.
To select a Memory programme:
1 Press Memory button. The “Memory” selection
field will be activated on the display.
2 Programme and other settings saved as Memory
appear on the display.
3 Press Start / Pause button to start the Memory
programme.