Beko WMXD 760 S Washer User Manual


 
EN
17
to “Synthetic” program. It must be used
for clothes for which sensitive washing is
recommended.
• Duo
You can use this program to wash
cottons and synthetics together. There is
no need to sort them.
• Xpress Super Short
Suitable for slightly soiled and little
amounts of laundry. E.g.: Laundry
without stain and put on just for once
etc. It may be used for rinsing purposes.
It performs washing at 30°C. Never use
for stained laundry. Do not place more
laundry than recommended (2 kg).
• Xpress 30˚ 30 min
Suitable for slightly soiled and more
amounts of laundry. It performs washing
at 30°C. Never use for stained laundry.
You can wash up to the maximum
loading capacity (7 kg). E.g.: Bathrobe
that was put on just for once, duvet
cover, sport wears, daily clothes and etc.
•Xpress 60˚ 58 min
Suitable for laundry that are not heavily
soiled but you want to wash at high
temperature and in a short time. You
can wash up to the maximum loading
capacity (7 kg). E.g.: underwear that
is suitable for high temperature, baby
garments and etc.
• Program of 88 mins.
In order to activate this program, “cotton
90°C” program and “quick wash”
auxiliary function should be selected
together.
Suitable for laundry that are not heavily
soiled but you want to wash at a very
high water temperature and in a short
time. You can wash up to the maximum
loading capacity (7 kg). E.g.: underwear
that is suitable for high temperature,
baby garments and etc.
• Hand Wash/Silk
You can wash your woollen/delicate
clothes that bear “not machine-
washable” labels for which hand wash
is recommended on this program. It
washes the laundry with very tender
washing movements without damaging
your clothes.
Special programs
For specific applications, you can select
any of the following programs:
• Rinse
This program is used when you want to
rinse or starch separately.
• Spin+drain
This program spins with maximum
possible rpm in the default setting after
the water drains from the machine.
C
You should use a lower spin speed
for delicate laundries.
Spin Speed selection
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator.
To change the spin speed, press the
“Spin” button. Spin speed decreases
gradually. Then, rinse hold and no spin
options can be selected respectively.
If you do not want to unload your
clothes immediately after the program,
you may use rinse hold function in
order to prevent your clothes become
wrinkled. With this function, your laundry
is kept in the final rinsing water. If you
want to spin your laundry that you left in
water:
- Adjust the spin speed.
- Press “Start/Pause/Cancel” button.
Program resumes. Your machine drains
the water and spins your laundry.
You can use no spin function in order to
drain the water without spinning at the
end of the program.