Filter
Top Products
33
EN
Machine does not switch to spinning step.
Automatic
unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the drum.
Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
Check the filter
and the draining hose.
Use
recommended amount of detergent.
Washing performance is poor: Laundry turns grey.
Use
the recommended amount of detergent appropriate for water hardness and the
laundry.
Select the proper temperature for the laundry to be washed.
Using insufficient
amount of detergent with hard water causes the soil to stick on the cloth and this
turns the cloth into grey in time. It is difficult to eliminate greying once it happens.
Use the recommended amount of detergent appropriate for water hardness and
the laundry.
Use the recommended amount of detergent
appropriate for water hardness and the laundry.
Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Stains persist or the laundry is not whitened.
Use recommended amount of
detergent appropriate for the laundry.
Do not load the machine in excess. Load
with amounts recommended in the "Programme and consumption table".
Select the proper
programme and temperature for the laundry to be washed.
Use original detergent appropriate for the
machine.
Put the detergent in the correct
compartment. Do not mix the bleaching agent and the detergent with each other.
Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Oily stains appeared on the laundry.
Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".
Washing performance is poor: Clothes smell unpleasantly.
Leave the
detergent drawer as well as the loading door of the machine ajar after each
washing. Thus, a humid environment favorable for bacteria cannot occur in the
machine.
Clean the drum regularly. For this,
please see "Cleaning the loading door and the drum".