26 / 36 EN
Washing Machine / User‘s Manual
6 Quick User Guide
6.1 Preparing the machine
1. Make sure that the hoses are connected tightly.
2. Plug in your machine.
3. Turn the tap on completely.
4. Place the laundry in the machine.
5. Add detergent and fabric softener.
6.2 Programme selection
Select the programme suitable for the type,
quantity and soiling degree of the laundry
in accordance with the „Programme and
consumptiontable“andthetemperaturetable
below.
6.3 Auxiliary function selection
Use the following auxiliary functions according
to your daily needs. Select the desired auxiliary
functions before starting the programme.
Furthermore, you may also select or cancel
auxiliary functions that are suitable to the running
programme without pressing the Start / Pause
button when the machine is operating. For this,
the machine must be in a step before the auxiliary
function you are going to select or cancel.
If the auxiliary function cannot be selected or
canceled, light of the relevant auxiliary function will
blink 3 times to warn the user.
6.4 Starting the programme
1. Press Start / Pause button to start the
programme.
2. Programme follow-up light showing the startup
of the programme will turn on.
C
If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
machine will switch to Pause mode and
the illumination level of the temperature,
speed and loading door indicator lights
will decrease. Other indicator lights
and indicators will turn off. Once the
Programme Selection knob is rotated or
any button is pressed, indicator lights and
indicators will turn on again.
6.5 Canceling the programme
To cancel the programme, turn the Programme
Selection knob to select another programme.
Previous programme will be canceled. End /
Cancel light will flash continuously to notify that
the programme has been canceled.
Your machine will end the programme when you
turn the Programme Selection knob; however,
it does not drain the water inside. When you
select and start a new programme, the newly
selected programme will start depending on the
step the previous programme was canceled in.
For example, it may take in additional water or
continue to wash with the water inside.
C
Depending on the step where the
programme was canceled in, you may
have to put detergent and softener again
for the programme you have selected
anew.