Beko WML 51021 Washer User Manual


  Open as PDF
of 52
 
12
EN
Starting the programme
Press Start / Pause button to start the programme.
Programmefollow-uplightshowingthestartupofthe
programme will turn on.
C
Ifnoprogrammeisstartedornokeyispressed
within 1 minute during programme selection
process, the machine will switch to Pause mode
and the illumination level of the temperature,
speed and loading door indicator lights will
decrease.Otherindicatorlightsandindicators
willturnoff.OncetheProgrammeSelection
knob is rotated or any button is pressed,
indicator lights and indicators will turn on again.
Child Lock
Usechildlockfunctiontopreventchildrenfrom
tampering with the machine. Thus you can avoid any
changes in a running programme.
C
IftheProgrammeSelectionknobisrotated
when the child lock is active, the lights on the
1
st
and 2
nd
auxiliary function buttons will blink
3 times. The child lock does not allow any
change in the programmes and the selected
temperature, speed and auxiliary functions.
C
Even if another programme is selected with the
Programme Selection knob while the Child Lock
is active, previously selected programme will
continue running.
C
When the Child Lock is active and the machine
is running, you can switch the machine to Pause
mode without deactivating the Child Lock by
turningtheProgrammeSelectionknobtoOn
/Offposition.WhenyouturntheProgramme
Selection knob afterwards, the programme will
resume.
To activate the Child Lock:
Press and hold 1
st
and 2
nd
Auxiliary Function buttons
for 3 seconds. The lights on the 1
st
and 2
nd
Auxiliary
Function buttons will flash while you keep the buttons
pressed for 3 seconds.
To deactivate the Child Lock:
Press and hold 1
st
and 2
nd
auxiliary function buttons
for 3 seconds while any programme is running. The
lights on the 1
st
and 2
nd
Auxiliary Function buttons
will flash while you keep the buttons pressed for 3
seconds.
C
Inadditiontothemethodabove,todeactivate
the Child Lock, switch the Programme Selection
knobtoOn/Offpositionwhennoprogrammeis
running, and select another programme.
C
When the power is restored after a power failure
or after your machine is unplugged and plugged
in again, the Child Lock will not be deactivated
when the machine resumes operating.
Progress of programme
Progress of a running programme can be followed
fromtheProgrammeFollow-upindicator.Atthe
beginning of every programme step, the relevant
indicator light will turn on and light of the completed
step will turn off.
You can change the auxiliary functions, speed
and temperature settings without stopping the
programme flow while the programme is running.
To do this, the change you are going to make must
beinastepaftertherunningprogrammestep.Ifthe
change is not compatible, relevant lights will flash for
3 times.
C
Ifthemachinedoesnotpasstothespinning
step,RinseHoldfunctionmightbeactiveorthe
automatic unbalanced load detection system
might be activated due to the unbalanced
distribution of the laundry in the machine.
Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases
when the water level is unsuitable.
Loading door light will start flashing when the
machine is switched to Pause mode. Machine
checksthelevelofthewaterinside.Ifthelevelis
suitable,LoadingDoorlightilluminatessteadilywithin
1-2minutesandtheloadingdoorcanbeopened.
Ifthelevelisunsuitable,LoadingDoorlightturnsoff
andtheloadingdoorcannotbeopened.Ifyouare
obligedtoopentheLoadingDoorwhiletheLoading
Doorlightisoff,youhavetocancelthecurrent
programme; see "Canceling the programme".
Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause button to switch the machine
to pause mode while a programme is running.
The light of the step which the machine is in starts
flashingintheProgrammeFollow-upindicatorto
show that the machine has been switched to the
pause mode.
Also, when the loading door is ready to be opened,
LoadingDoorlightwillalsoilluminatecontinuouslyin
addition to the programme step light.
Changing the speed and temperature settings
for auxiliary functions
Dependingonthesteptheprogrammehasreached,
you may cancel or activate the auxiliary functions;
see, "Auxiliary function selection".
You may also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
C
Ifnochangeisallowed,therelevantlightwill
flash for 3 times.
Adding or taking out laundry
Press the Start / Pause button to switch the machine
topausemode.Theprogrammefollow-uplight
of the relevant step during which the machine
was switched into the pause mode will flash.
WaituntiltheLoadingDoorcanbeopened.Open
theLoadingDoorandaddortakeoutthelaundry.
ClosetheLoadingDoor.Makechangesinauxiliary
functions, temperature and speed settings if
necessary. Press Start / Pause button to start the
machine.
Canceling the programme
To cancel the programme, turn the Programme
Selection knob to select another programme.
Previous programme will be canceled. End /
Cancel light will flash continuously to notify that the
programme has been canceled.
 previous next