Beko WMD 78144 Washer User Manual


  Open as PDF
of 40
 
EN
21
1. Opentheloadingdoor,placethe
laundry inside and fill detergent
drawer.
2. Set the washing program,
temperature, spin speed and,
if required, select the auxiliary
functions.
3. Press“Timedelaying”buttons
“+”and“-”(Figure2-8)toset
your desired time delay. The Time
delayingsymbol(Figure3-13h)will
flash.
4. Press“Start/Pause/Cancel”button
(Figure2-10).Thenthetimedelay
starts to count down. The Time
delayingsymbol(Figure3-13h)will
lightup.TheStartsymbol(Figure
3-13j)willlightup.
 The“:”inthemiddleofthedisplayed
time delay will start to flash.
•
Morelaundrymaybeloadedor
taken out during the time delay
period. At the end of the time delay
countdown process, time delaying
symbol(Figure3-13h)fadesand
the washing starts as the program
duration is displayed.
Changing the delay time
If you want to change the time during
thecountdown:
1. Press“Start/Pause/Cancel”button
(Figure2-10).“:“inthemiddleof
the screen will stop flashing. The
Standbysymbol(Figure3-13k)will
light up. The Time delaying symbol
(Figure3-13h)willflash.TheStart
Symbol(Figure3-13j)willfade.
2. Press“Timedelaying”buttons“+”or
“-”(Figure2-8)tosetyourdesired
time delay.
3. Press“Start/Pause/Cancel”button
(Figure2-10).TheTimedelaying
symbol(Figure3-13h)willlightup.
TheStandbysymbol(Figure3-13k)
willfade.TheStartsymbol(Figure
3-13j)willlightup.
4. The“:”inthemiddleofthedisplayed
time delay will start to flash.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program
immediately:
1. Press“Start/Pause/Cancel”button
(Figure2-10).The“:”inthemiddle
of the displayed time delay will stop
flashing.
2. Startsymbol(Figure3-13j)willfade.
Thestandbysymbol(Figure3-13k)
andthetimedelayingsymbol(Figure
3-13h)willflash.
3. Presstimedelayingbutton“-”
(Figure2-8)todecreasethedesired
timedelay.Programdurationafter
30 minutes shall be displayed.
4. PressStart/Pause/CancelButton
(Figure2-10)tostarttheprogram.
Starting the Program
1. PressStart/Pause/Cancelbutton
(Figure2-10)tostarttheprogram.
2. Thestartsymbol(Figure3-13j)
which indicates that the program
has started will light up.
3. The door locks and the door locked
symbol(Figure3-13i)willlightup.
4. The Symbol of the relevant step
(prewash,mainwash,rinse,softener
andspin)thattheprogramhas
startedfromwilllightup(Figure
3-13f).
Progress of program
The progress of a running program is
shown through a number of symbols on
the screen.
•
At the beginning of each program
step, the relevant symbol in the
series of symbols will light up and
thus, at the end of the program,
all symbols will remain lit up. The
symbol that lights up at the far right
of the series of symbols indicates
the step that is being carried out.
Pre-wash
When "prewash" auxiliary function is
selected, prewash symbol will light up to
indicate the beginning of prewash step.
 previous next