Filter
Top Products
24
EN
Auxiliary function selection
Select the desired auxiliary functions before
starting the programme. Furthermore, you
may also select or cancel auxiliary functions
that are suitable to the running programme
by pressing the Start / Pause / Cancel
button when the machine is operating. For
this, the machine must be in a step before
the auxiliary function you are going to
select or cancel.
Depending on the programme, press 2a,
2b, 2c or 2d buttons to select the desired
auxiliary function. Symbol of the selected
auxiliary function appears on the display.
a b c d
C
Some functions cannot be selected
together. If a second auxiliary function
conflicting with the first one is selected
before starting the machine, the
function selected first will be canceled
and the second auxiliary function
selection will remain active. For
example, if you want to select Quick
Wash after you have selected the
Prewash, Prewash will be canceled and
Quick Wash will remain active.
C
An auxiliary function that is not
compatible with the programme cannot
be selected. (See "Programme and
consumption table")
C
Auxiliary Function buttons may vary
according to the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily
soiled laundry. Not using the Prewash will
save energy, water, detergent and time.
F1 appears on the display when you select
this function (a).
• Quick Wash
This function can be used in Cottons and
Synthetics programmes. It decreases the
washing times and also the number of
rinsing steps for lightly soiled laundry.
F2 appears on the display when you select
this function (b).
C
When you select this function, load
your machine with half of the maximum
laundry specified in the programme
table.
• Extra Rinse
This function enables the machine to
make another rinsing in addition to the one
already made after the main wash. Thus,
the risk for sensitive skins (babies, allergic
skins, etc.) to be effected by the minimal
detergent remnants on the laundry can be
reduced.
F3 appears on the display when you select
this function (c).
• Anti- Crease
This function creases the clothes lesser
when they are being washed. Drum
movement is reduced and spinning speed
is limited to prevent creasing. In addition,
washing is done with a higher water level.
F4 appears on the display when you select
this function (d).
• Rinse Hold
If you are not going to unload your
clothes immediately after the programme
completes, you may use rinse hold
function to keep your laundry in the final
rinsing water in order to prevent them
from getting wrinkled when there is no
water in the machine. Press Start / Pause
/Cancel button after this process if you
want to drain the water without spinning
your laundry. Programme will resume and
complete after draining the water.
If you want to spin the laundry held in
water, adjust the Spin Speed and press
Start / Pause / Cancel button.
The programme resumes. Water is drained,
laundry is spun and the programme is
completed.
• Soaking
The Soaking auxiliary function ensures
better removal of stains ingrained into the
clothes by holding them in the detergent
water prior to startup of the programme.
Time display
Remaining time to complete the
programme appears on the display while
the programme is running. Tim is displayed
as “01:30” in hours and minutes format.