Beko WMB 81242 PTMNX Washer User Manual


  Open as PDF
of 80
 
14 / 79 EN
WashingMachine/User’sManual
Changing the delayed start period
Ifyouwanttochangethetimeduringcountdown:
PressStart/Pause/Cancelbutton.“:”signinthemiddleof
thedelayedstarttimeonthedisplaystopsflashing.Pause
symbolappears.DelayedStartsymbolflashes.Startsymbol
disappears.Setthedesireddelayedstarttimebypressing
theDelayedStart+or-buttons.PressStart/Pause/
Cancelbutton.DelayedStartsymbolilluminatessteadily.
Pausesymboldisappears.Startsymbolappears.“:”sign
in the middle of the delayed start time on the display starts
flashing.
Cancelling the Delayed Start function
Ifyouwanttocancelthedelayedstartcountdownandstart
the programme immediately:
PressStart/Pause/Cancelbutton.“:”signinthemiddle
ofthedelayedstarttimeonthedisplaystopsflashing.Start
symboldisappears.PausesymbolandDelayedStartsymbol
flashes.Decreasethedelayedstarttimebypressingthe
DelayedStart-button.Programmedurationappearsafter
30minutes.PressStart/Pause/Cancelbuttontostartthe
programme.
4.13 Starting the programme
PressStart/Pause/Cancelbuttontostarttheprogramme.
Startsymbolshowingthestartupoftheprogrammewillturn
on.LoadingdoorislockedandDoorLockedsymbolappears
onthedisplay.Thesymbolofthestepfromwhichthe
programmehasstartedappearsonthedisplay(Prewash,
MainWash,Rinse,SoftenerandSpin).
4.14 Progress of programme
Progressofarunningprogrammeisindicatedonthedisplay
withasetofsymbols.
Relevantsymbolappearsonthedisplayatthebeginningof
eachprogrammestepandallsymbolsremainlitattheend
oftheprogramme.Thefarthermostrightsymbolindicates
the current programme step.
Prewash
IfthePrewashauxiliaryfunctionisselected,Prewashsymbol
appears on the display indicating that the prewash step has
started.
Main Wash
MainWashsymbolindicatingthatthemainwashstephas
started appears on the display.
Rinse
Rinsesymbolindicatingthattherinsingstephasstarted
appears on the display.
Softener
Softenersymbolindicatingthatthesoftenerstephasstarted
appears on the display.
Spin
Appearsatthebeginningofthefinalspinstepandremains
litduringSpinandPumpspecialprogrammes.
C
Ifthemachinedoesnotpasstothespinningstep,
RinseHoldfunctionmightbeactiveortheautomatic
unbalancedloaddetectionsystemmightbeactivated
duetotheunbalanceddistributionofthelaundryinthe
machine.
4.15 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
thewaterlevelisunsuitable.
DoorLockedsymbolappearswhentheloadingdooris
locked.Thissymbolwillflashuntiltheloadingdoorbecomes
ready to open when programme completes or the machine
ispaused.Donotforcetoopentheloadingdoorinthisstep.
Symboldisappearswhenthedoorisreadytoopen.Youcan
openthedoorwhenthesymboldisappears.
4.16 Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pause/Cancelbuttontoswitchthe
machinetopausemode.Pausesymbolappearsonthe
displayindicatingthatthemachineispaused.Startsymbol
disappears.
Changing the speed and temperature settings for
auxiliary functions
Dependingonthesteptheprogrammehasreached,you
maycanceloractivatetheauxiliaryfunctions;see,"Auxiliary
functionselection".
Youmayalsochangethespeedandtemperaturesettings;
see,"Spinspeedselection"and"Temperatureselection".
Adding or taking out laundry
PresstheStart/Pause/Cancelbuttontoswitchthe
machine to pause mode. The programme follow-up light of
the relevant step during which the machine was switched
intothepausemodewillflash.WaituntiltheLoadingDoor
canbeopened.OpentheLoadingDoorandaddortake
outthelaundry.ClosetheLoadingDoor.Makechanges
inauxiliaryfunctions,temperatureandspeedsettingsif
necessary.PressStart/Pause/Cancelbuttontostartthe
machine.
C
The loading door will not open if the water temperature
inthemachineishighorthewaterlevelisabovethe
door opening.
4.17 Child Lock
UseChildLockfunctiontopreventchildrenfromtampering
with the machine. Thus you can avoid any changes in a
running programme.
C
You can switch on and off the machine with On / Off
buttonwhentheChildLockisactive.Whenyouswitch
onthemachineagain,programmewillresumefrom
where it has stopped.
To activate the Child Lock:
Pressandhold2
nd
and 4
th
AuxiliaryFunctionbuttonsfor3
seconds.“Con”appearsonthedisplay.
C
Samephrasewillappearonthedisplayifyoupress
anybuttonwhenChildLockisenabled.
To deactivate the Child Lock:
Pressandhold2
nd
and 4
th
AuxiliaryFunctionbuttonsfor3
seconds.“COFF”appearsonthedisplay.
C
Donotforgettodisablethechildlockattheendof
theprogrammeifitwasenabledbefore.Otherwise,
machine will not allow to select a new programme.
 previous next