Beko WMB71242PTLMA Washer User Manual


  Open as PDF
of 76
 
13 / 75 EN
Washing Machine / User’s Manual
flashes.Decreasethedelayedstarttimebypressingthe
DelayedStart-button.Programmedurationappearsafter
30minutes.PressStart/Pause/Cancelbuttontostartthe
programme.
4.13 Starting the programme
PressStart/Pause/Cancelbuttontostarttheprogramme.
Startsymbolshowingthestartupoftheprogrammewillturn
on.LoadingdoorislockedandDoorLockedsymbolappears
onthedisplay.Thesymbolofthestepfromwhichthe
programmehasstartedappearsonthedisplay(Prewash,
MainWash,Rinse,SoftenerandSpin).
4.14 Progress of programme
Progressofarunningprogrammeisindicatedonthedisplay
withasetofsymbols.
Relevantsymbolappearsonthedisplayatthebeginningof
eachprogrammestepandallsymbolsremainlitattheend
oftheprogramme.Thefarthermostrightsymbolindicates
the current programme step.
Prewash
IfthePrewashauxiliaryfunctionisselected,Prewashsymbol
appears on the display indicating that the prewash step has
started.
Main Wash
MainWashsymbolindicatingthatthemainwashstephas
started appears on the display.
Rinse
Rinsesymbolindicatingthattherinsingstephasstarted
appears on the display.
Softener
Softenersymbolindicatingthatthesoftenerstephasstarted
appears on the display.
Spin
Appearsatthebeginningofthefinalspinstepandremains
litduringSpinandPumpspecialprogrammes.
C
Ifthemachinedoesnotpasstothespinningstep,
RinseHoldfunctionmightbeactiveortheautomatic
unbalancedloaddetectionsystemmightbeactivated
duetotheunbalanceddistributionofthelaundryinthe
machine.
4.15 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
thewaterlevelisunsuitable.
DoorLockedsymbolappearswhentheloadingdooris
locked.Thissymbolwillflashuntiltheloadingdoorbecomes
ready to open when programme completes or the machine
ispaused.Donotforcetoopentheloadingdoorinthisstep.
Symboldisappearswhenthedoorisreadytoopen.Youcan
openthedoorwhenthesymboldisappears.
4.16 Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pause/Cancelbuttontoswitchthe
machinetopausemode.Pausesymbolappearsonthe
displayindicatingthatthemachineispaused.Startsymbol
disappears.
Changing the speed and temperature settings for
auxiliary functions
Dependingonthesteptheprogrammehasreached,you
maycanceloractivatetheauxiliaryfunctions;see,"Auxiliary
functionselection".
You may also change the speed and temperature settings;
see,"Spinspeedselection"and"Temperatureselection".
Adding or taking out laundry
PresstheStart/Pause/Cancelbuttontoswitchthe
machine to pause mode. The programme follow-up light of
the relevant step during which the machine was switched
intothepausemodewillflash.WaituntiltheLoadingDoor
canbeopened.OpentheLoadingDoorandaddortake
outthelaundry.ClosetheLoadingDoor.Makechanges
inauxiliaryfunctions,temperatureandspeedsettingsif
necessary.PressStart/Pause/Cancelbuttontostartthe
machine.
C
The loading door will not open if the water temperature
inthemachineishighorthewaterlevelisabovethe
door opening.
4.17 Child Lock
UseChildLockfunctiontopreventchildrenfromtampering
with the machine. Thus you can avoid any changes in a
running programme.
C
You can switch on and off the machine with On / Off
buttonwhentheChildLockisactive.Whenyouswitch
onthemachineagain,programmewillresumefrom
where it has stopped.
To activate the Child Lock:
Pressandhold2
nd
and 4
th
AuxiliaryFunctionbuttonsfor3
seconds.“Con”appearsonthedisplay.
C
Samephrasewillappearonthedisplayifyoupress
anybuttonwhenChildLockisenabled.
To deactivate the Child Lock:
Pressandhold2
nd
and 4
th
AuxiliaryFunctionbuttonsfor3
seconds.“COFF”appearsonthedisplay.
C
Donotforgettodisablethechildlockattheendof
theprogrammeifitwasenabledbefore.Otherwise,
machine will not allow to select a new programme.
4.18 Cancelling the programme
PressandholdStart/Pause/Cancelbuttonfor3seconds.
Startsymbolflashes.Symbolofthestepatwhichthe
programmewascancelledremainslit."End"appearsonthe
display and the programme is cancelled.
C
Ifyouwanttoopentheloadingdoorafteryouhave
cancelledtheprogrammebutitisnotpossibletoopen
the loading door since the water level in the machine
isabovetheloadingdooropening,thenturnthe
ProgrammeSelectionknobtoPump+Spinprogramme
and discharge the water in the machine.
4.19 Machine is in Rinse Hold mode
SpinsymbolflashesandPausesymbolilluminateswhenthe
machine is in Rinse Hold mode.
Ifyouwanttospinyourlaundrywhenthemachineisinthis
mode:
AdjustthespinspeedandpressStart/Pause/Cancel
button.PausesymboldisappearsandStartsymbolappears.
Programmeresumes,dischargesthewaterandspinsthe
laundry.
 previous next