Beko WMB71232PTM Washer User Manual


  Open as PDF
of 72
 
13 / 72 EN
Washing Machine / User’s Manual
C
Ifnoprogrammeisstartedornokeyispressedwithin
1minuteduringprogrammeselectionprocess,the
machinewillswitchtoPausemodeandtheillumination
levelofthetemperature,speedandloadingdoor
indicator lights will decrease. Other indicator lights and
indicatorswillturnoff.OncetheProgrammeSelection
knobisrotatedoranybuttonispressed,indicatorlights
and indicators will turn on again.
4.12 Child Lock
UseChildLockfunctiontopreventchildrenfromtampering
with the machine. Thus you can avoid any changes in a
running programme.
C
IftheProgrammeSelectionknobisturnedwhenthe
ChildLockisactive,“Con”appearsonthedisplay.
TheChildLockdoesnotallowanychangeinthe
programmesandtheselectedtemperature,speedand
auxiliary functions.
C
Even if another programme is selected with the
ProgrammeSelectionknobwhiletheChildLockis
active,previouslyselectedprogrammewillcontinue
running.
To activate the Child Lock:
Pressandhold1
st
and 2
nd
AuxiliaryFunctionbuttonsfor
3 seconds. The lights on the 1
st
and 2
nd
AuxiliaryFunction
buttonswillflash,and"C03","C02","C01"willappearon
thedisplayrespectivelywhileyoukeepthebuttonspressed
for3seconds.Then,"Con"willappearonthedisplay
indicatingthattheChildLockisactivated.Ifyoupressany
buttonorturntheProgrammeSelectionknobwhentheChild
Lockisactive,samephrasewillappearonthedisplay.The
lightsonthe1stand2ndauxiliaryfunctionbuttonsthatare
usedtodeactivatetheChildLockwillblink3times.
TodeactivatetheChildLock:
Pressandhold1
st
and 2
nd
auxiliaryfunctionbuttonsfor3
seconds while any programme is running. The lights on the
1
st
and 2
nd
AuxiliaryFunctionbuttonswillflash,and"C03",
"C02","C01"willappearonthedisplayrespectivelywhile
youkeepthebuttonspressedfor3seconds.Then,"COFF"
willappearonthedisplayindicatingthattheChildLockis
deactivated.
C
Inadditiontothemethodabove,todeactivatetheChild
Lock,switchtheProgrammeSelectionknobtoOn/
Offpositionwhennoprogrammeisrunning,andselect
another programme.
C
ChildLockisnotdeactivatedafterpowerfailuresor
when the machine is unplugged.
4.13 Progress of programme
Progressofarunningprogrammecanbefollowedfromthe
ProgrammeFollow-upindicator.Atthebeginningofevery
programmestep,therelevantindicatorlightwillturnonand
light of the completed step will turn off.
Youcanchangetheauxiliaryfunctions,speedand
temperature settings without stopping the programme flow
whiletheprogrammeisrunning.Todothis,thechange
youaregoingtomakemustbeinastepaftertherunning
programmestep.Ifthechangeisnotcompatible,relevant
lights will flash for 3 times.
C
Ifthemachinedoesnotpasstothespinningstep,
RinseHoldfunctionmightbeactiveortheautomatic
unbalancedloaddetectionsystemmightbeactivated
duetotheunbalanceddistributionofthelaundryinthe
machine.
4.14 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
thewaterlevelisunsuitable.
Loading door light will start flashing when the machine
isswitchedtoPausemode.Machinechecksthelevelof
thewaterinside.Ifthelevelissuitable,LoadingDoorlight
illuminates steadily within 1-2 minutes and the loading door
canbeopened.
Ifthelevelisunsuitable,LoadingDoorlightturnsoffandthe
loadingdoorcannotbeopened.Ifyouareobligedtoopen
theLoadingDoorwhiletheLoadingDoorlightisoff,you
havetocancelthecurrentprogramme;see"Cancelingthe
programme".
4.15 Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pausebuttontoswitchthemachineto
pause mode while a programme is running. The light of
the step which the machine is in starts flashing in the
ProgrammeFollow-upindicatortoshowthatthemachine
hasbeenswitchedtothepausemode.
Also,whentheloadingdoorisreadytobeopened,Loading
Doorlightwillalsoilluminatecontinuouslyinadditiontothe
programme step light.
Changing the speed and temperature settings for
auxiliary functions
Dependingonthesteptheprogrammehasreached,you
maycanceloractivatetheauxiliaryfunctions;see,"Auxiliary
functionselection".
You may also change the speed and temperature settings;
see,"Spinspeedselection"and"Temperatureselection".
C
Ifnochangeisallowed,therelevantlightwillflashfor
3 times.
Adding or taking out laundry
PresstheStart/Pausebuttontoswitchthemachineto
pause mode. The programme follow-up light of the relevant
step during which the machine was switched into the pause
mode will flash. WaituntiltheLoadingDoorcanbeopened.
OpentheLoadingDoorandaddortakeoutthelaundry.
ClosetheLoadingDoor. Makechangesinauxiliaryfunctions,
temperature and speed settings if necessary. PressStart/
Pausebuttontostartthemachine.
4.16 Canceling the programme
Tocanceltheprogramme,turntheProgrammeSelection
knobtoselectanotherprogramme.Previousprogramme
willbecanceled.End/Cancellightwillflashcontinuouslyto
notifythattheprogrammehasbeencanceled.
Pumpfunctionisactivatedfor1-2minutesregardlessofthe
programmestep,andwhetherthereiswaterinthemachine
ornot.Afterthisperiod,yourmachinewillbereadytostart
with the first step of the new programme.
 previous next