Filter
Top Products
25
EN
Delayed Start (In some models only)
With the Delayed Start function the
startup of the programme may be delayed
up to 3, 6 or 9 hours.
C
Do not use liquid detergents when
you set Delayed Start! There is the
risk of staining of the clothes.
Open the loading door, place the
laundry and put detergent, etc. Select
the washing programme, temperature,
spin speed and, if required, the auxiliary
functions. Set the desired time by
pressing the Delayed Start button. When
the button is pressed once, 3 hours
delayed start is selected. When the same
button is pressed again, 6 hours delay
is selected, and when it is pressed for
the third time, 9 hours delayed start is
selected. If you press the Delayed Start
button once again, Delayed Start function
will be canceled. Press Start / Pause
button. Previous delayed start time light
turns off and next delayed start time light
turns on after every 3 hours. At the end of
the countdown, all delayed start lights will
turn off and the selected programme will
start.
C
Additional laundry may be loaded
during the delayed start period.
Changing the Delayed Start period
Press Delayed Start button. Every time
the button is pressed, the period will
change in 3-hour increments and the light
of the selected delayed start time will turn
on.
Cancelling the Delayed Start function
If you want to cancel the delayed start
countdown and start the programme
immediately:
Set the Delayed Start period to zero (all
delayed start period lights will turn off)
or turn the Programme Selection knob
to any programme. Thus, Delayed Start
function will be canceled. The End/Cancel
light flashes continuously. Then, select
the programme you want to run again.
Press Start / Pause button to start the
programme.
Starting the programme
Press Start / Pause button to start the
programme. Programme follow-up light
showing the startup of the programme will
turn on.
C
If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
machine will switch to Pause mode
and the illumination level of the
temperature, speed and loading
door indicator lights will decrease.
Other indicator lights and indicators
will turn off. Once the Programme
Selection knob is rotated or any
button is pressed, indicator lights and
indicators will turn on again.
Child Lock
Use child lock function to prevent children
from tampering with the machine. Thus
you can avoid any changes in a running
programme.
C
If the Programme Selection knob is
rotated when the child lock is active,
the lights on the 1
st
and 2
nd
auxiliary
function buttons will blink 3 times. The
child lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary
functions.
C
Even if another programme is
selected with the Programme
Selection knob while the Child
Lock is active, previously selected
programme will continue running.
C
When the Child Lock is active and
the machine is running, you can
switch the machine to Pause mode
without deactivating the Child Lock
by turning the Programme Selection
knob to On / Off position. When
you turn the Programme Selection
knob afterwards, the programme will
resume.
To activate the Child Lock:
Press and hold 1
st
and 2
nd
Auxiliary
Function buttons for 3 seconds. The
lights on the 1
st
and 2
nd
Auxiliary Function
buttons will flash while you keep the
buttons pressed for 3 seconds.
To deactivate the Child Lock:
Press and hold 1
st
and 2
nd
auxiliary
function buttons for 3 seconds while any
programme is running. The lights on the
1
st
and 2
nd
Auxiliary Function buttons will
flash while you keep the buttons pressed