EN
23
Program in rinse hold mode
•
This process is shown with the
flashingSpinSymbol(Figure3-
13c)andthelitupStandbySymbol
(Figure3-13k).
If you wish to spin when the machine is
inthismode:
Adjustthespinspeed.Press“Start/
Pause/Cancel”button(Figure2-10).
The program continues, pumps out
the water and spins. Standby Symbol
(Figure3-13k)fadesoutandStart
Symbol(Figure3-13j)lightsup.
If you want to discharge the water only
withoutspinning:
Press“Start/Pause/Cancel”button
(Figure2-10).Standbysymbol(Figure3-
13k)willfade.Startsymbol(Figure3-13j)
will light up. The program continues and
only pumps out the water.
End of program
When the program is finished, the
symbols of the relevant steps will remain
lit up and the auxiliary function, spin and
temperature data selected at the start-
up of the program will remain selected.
“End”labelwillappearonthescreen.