Beko WM 6123 W Washer User Manual


  Open as PDF
of 36
 
20 EN
selecting the washing program. The
“Programfinished”lampilluminates
andthe“Wash”lightwillfadewhenthe
programcomestoanend.The“Lid”
lightflashes.Meanwhile,thedoorwill
stay locked for your safety and when it
issafetoopen,the“Lid”and“Program
Finished”lightsremainon.
Youcanputyourmachineinto“Pause”
modebypressingthe“Start/Pause/
Cancel”buttonwhenitisoperating.
Inthiscase,the“Start/Pause/Cancel”
light will flash. Some changes in
program settings can be made in pause
mode(See.ChangingaProgram)
andif“Pause”modeisenteredatan
appropriate step of the program, the
adding laundry function may be used.
(See,Addingandtakingoutlaundry).
Press“Start/Pause/Cancel”button
againtoreturntothe“Wash”mode
from“Pause”mode.Inthiscasethe
“Start/Pause/Cancel”buttonwilllight
up continuously and the machine will
resume operating from the step it was
paused.
•
If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated because
of unbalanced distribution of laundry
in the machine.
Changing the program after
the program has started
Youcanusethisfeatureafteryour
machine has started to wash different
textile groups in the same batch
of clothes under higher or lower
temperatures.
Forexample;
Pressandholdthe“Start/Pause/
Cancel”buttonfor3secondsto
“Cancel”theprograminorderto
select“Cottons40”programinsteadof
“Cottons60”program.
Selectthe“Cottons40”programby
rotating the program knob.
Press“Start/Pause/Cancel”buttonto
start the program.
C
The program which is selected
first will go on even if the program
selection button is moved and
another program mode is selected
whilethemachineisoperating.You
must cancel the ongoing program
in order to change the washing
program.(See,CancelingaProgram)
Selecting or cancelling an auxiliary
function/temperature/spin speed
1.Pressthe“Start/Pause/Cancel”
button to switch the machine to
“Pause”mode.
2. Change the auxiliary function’s
temperature and spin speed.
Press“Start/Pause/Cancel”buttonto
start the program.
C
The selection to be made must be
appropriate. For example, if your
machine is on the main wash cycle,
you may select additional rinse
auxiliary function, but you cannot
select pre-wash.
C
The spin speed and temperature
which are selected first will keep on
being valid even if the position of the
spin speed or temperature selection
knobischanged.Pressthe“Start/
Pause/Cancel”buttonandswitch
themachineto“Pause”modein
order to change the spin speed or
temperature. New spin speed or
temperature can be selected.
Adding/removing laundry in standby
mode
If you want to add more laundry into the
machine after the washing cycle has
started,putthemachineinto“Pause”
modebypressingthe“Start/Pause/
Cancel”button.The“Lid”lamponthe
program follow-up indicator will light up
steadily after 1-2 minutes if the water
level in the machine is suitable. Laundry
may be added or taken out by opening
thedoor.Ifthe“Lid”lampdoesnot
light up continuously at the end of this
time, the water level in the machine
is not suitable and laundry cannot be
added.Youcanresumetheprogram
bypressingthe“Start/Pause/Cancel”
button again.
 previous next