Beko WM 6103 W Washer User Manual


 
26 EN
filter to receive water flowing from the
filter.
•Loosenpumpfilter(anticlockwise)
until water starts to flow out of it.
Direct the flowing water into the
container you have placed in front of
thefilter.Youcanuseapieceofcloth
to absorb any spilled water.
•Whenthereisnowaterleft,turnthe
pump filter until it is completely loose
and remove it.
•Cleananyresiduesinsidethefilter
as well as fibers, if any, around the
propeller region.
•Ifyourproducthasawaterjetfeature,
be sure to fit the filter into its housing
in the pump. Never force the filter
while replacing it into its housing.
Fitthefilterfullyintoitshousing;
otherwise, water may leak from the
filter cap.
4- Close the filter cap.
Close the two-piece filter cap of your
product by pushing the tab on it.
Close the one-piece filter cap of your
product by fitting the tabs on the bottom
into their positions and pushing the
upper part of it.