Filter
Top Products
22
EN
displayed. “_” symbol will disappear
and the selected programme will
start.
Changing the Delayed Start period
If you want to change the time during
countdown:
1. Press Delayed Start button. Time will
increase by 1 hour each time you
press the button.
2. If you want to decrease the delayed
start time, press Delayed Start button
repeatedly until the desired delayed
start time appears on the display.
Cancelling the Delayed Start function
If you want to cancel the delayed start
countdown and start the programme
immediately:
1. Set the Delayed Start period to zero
or turn the Programme Selection knob
to any programme. Thus, Delayed
Start function will be canceled. The
End/Cancel light flashes continuously.
2. Then, select the programme you want
to run again.
3. Press Start / Pause button to start the
programme.
Starting the programme
1. Press Start / Pause button to start the
programme.
2. Programme follow-up light showing
the startup of the programme will turn
on.
C
If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
machine will switch to Pause mode
and the illumination level of the
temperature, speed and loading
door indicator lights will decrease.
Other indicator lights and indicators
will turn off. Once the Programme
Selection knob is rotated or any
button is pressed, indicator lights and
indicators will turn on again.
Child Lock
Use Child Lock function to prevent
children from tampering with the machine.
Thus you can avoid any changes in a
running programme.
C
If the Programme Selection knob is
turned when the Child Lock is active,
"Con" appears on the display. The
Child Lock does not allow any change
in the programmes and the selected
temperature, speed and auxiliary
functions.
C
Even if another programme is
selected with the Programme
Selection knob while the Child
Lock is active, previously selected
programme will continue running.
To activate the Child Lock:
Press and hold 1
st
and 2
nd
Auxiliary
Function buttons for 3 seconds.
The lights on the 1
st
and 2
nd
Auxiliary
Function buttons will flash, and "C03",
"C02", "C01" will appear on the display
respectively while you keep the buttons
pressed for 3 seconds. Then, "Con" will
appear on the display indicating that the
Child Lock is activated. If you press any
button or turn the Programme Selection
knob when the Child Lock is active, same
phrase will appear on the display. The
lights on the 1st and 2nd auxiliary function
buttons that are used to deactivate the
Child Lock will blink 3 times.
To deactivate the Child Lock:
Press and hold 1
st
and 2
nd
auxiliary
function buttons for 3 seconds while any
programme is running. The lights on the
1
st
and 2
nd
Auxiliary Function buttons
will flash, and "C03", "C02", "C01" will
appear on the display respectively while
you keep the buttons pressed for 3
seconds. Then, "COFF" will appear on the
display indicating that the Child Lock is
deactivated.
C
In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On
/ Off position when no programme
is running, and select another
programme.
C
Child Lock is not deactivated after
power failures or when the machine is
unplugged.
Progress of programme
Progress of a running programme
can be followed from the Programme
Follow-up indicator. At the beginning
of every programme step, the relevant
indicator light will turn on and light of the
completed step will turn off.
You can change the auxiliary functions,
speed and temperature settings without
stopping the programme flow while the
programme is running. To do this, the
change you are going to make must be in
a step after the running programme step.
If the change is not compatible, relevant
lights will flash for 3 times.