Filter
Top Products
21
EN
Auxiliary functions
Auxiliary function selection keys
Select the required auxiliary functions
before starting the programme.
C
Auxiliary function buttons may differ
according to the model of your
machine.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and the
last auxiliary function selection will remain
active.
For example: If you want to select pre-
wash first and then quick wash, pre-wash
will be cancelled and quick wash will
remain active.
Auxiliary function that is not compatible
with the programme cannot be selected.
(see “Programme Selection Table”)
• Prewash
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you save
energy, water, detergent and time.
Pre-wash without detergent is
recommended for lace and curtains.
Less detergent should be put in the
main wash compartment as loose knit
fabrics (lace) foam too much due to its
meshed structure.
• Time Save
This function can be used for cottons
and synthetics programmes. It decreases
the washing times for lightly soiled
laundries and also the number of rinsing
steps. Shortens the programme time
approximately 45 minutes.
• Extra Rinse
With this function, you can increase the
number of current rinsing steps. Thus,
sensitive skins’ risk of being affected by the
remainder detergent on the clothes will be
decreased.
• Anti-Creasing
This function reduces drum movement
and limits the spinning speed to prevent
creasing. In addition, washing is carried out
at a higher water level.
C
Use this function for delicate laundries
that crease easily.
C
Whenever you select this auxiliary
function, load your machine with half of
the maximum laundry specified in the
programme table.
• Rinse Hold
If you do not want to unload your clothes
immediately after the cotton, synthetics,
woolen and delicate fabrics programme,
you may release your clothes inside
the machine in the last rinsing water by
pressing the rinse hold button in order to
prevent your clothes become wrinkled. You
can spin by pressing “Start/Pause/Cancel”
button after this process.
• No Spin
You may use this programme if you do
not want to spin your clothes at the end
of cottons, synthetics, woolen or delicate
programmes.
• Spin speed reduction
You can have your clothes spun at the
maximum rpm selection on your machine
by using the selection knob in models
equipped with an rpm selection knob. In
order to protect your clothes, your machine
will not spin above 800 rpm on synthetic
programmes and 600 rpm on woolens
programme. Furthermore, if you want to
skip the spin cycle and take your clothes
out, turn the rpm selection knob to “no
spin” position.
C
You can use no spin function in order to
drain the water without spinning at the end
of the programme.
Time delay
C
Applies for models with time delay
function
If you wish to wash your clothes at a later
time, with the time delay function you can
delay the programme start up 3 hours, 6
hours or 9 hours.
1. Open the loading door, place the
laundry inside and fill detergent drawer.
2. Set the washing programme,
temperature, spin speed and, if
required, the auxiliary functions.
3. When the time delaying button is
pressed once, a 3 hour delay is
selected and the relevant led lights.