Filter
Top Products
23
EN
C
The spin speed and temperature which
are selected first will keep on being
valid even if the position of the spin
speed or temperature selection knob is
changed. Press “Start/Pause/Cancel”
button and switch the machine to
“Pause” mode in order to change the
spin speed or temperature. New spin
speed or temperature can be selected.
Adding/removing laundry in standby
mode
If you want to add more laundry into the
machine after the washing cycle has
started, put the machine into “Pause”
mode by pressing the “Start/Pause/
Cancel” button. The “Ready” lamp on the
programme follow-up indicator will light
up after 1-2 minutes if the water level in
the machine is suitable. Laundry may be
added or taken out by opening the door.
If the “Ready” lamp does not light up
continuously at the end of this time, the
water level in the machine is not suitable
and laundry cannot be added. You can
resume the programme by pressing the
“Start/Pause/Cancel” button again.
Child/key lock
There is a child/key lock to prevent any
programme interruption because of
pressing the keys while the programme is
on.
C
Your machine can be turned on and off
with On/Off button while the child-proof
lock is activated. In this case, your
machine will resume its programme
with child-proof lock activated.
In order to activate the childproof lock,
press on the 1st and 2nd auxiliary function
keys from the left simultaneously for 3
seconds after the washing programme has
started. 1st auxiliary function light will flash
continuously.
To start a new programme after the
programme is over or to interfere the
programme, child/key lock should be
deactivated. To deactivate the child-proof
lock, press the same buttons for 3 sec.
Ending the programme
through cancelling
The programme which is selected first will
keep on going even if the position of the
programme selection button is changed. A
new programme can be selected or started
after “Programme is cancelled” in order to
change the washing programme.
To cancel any selected programme;
•
Press “Start/Pause/Cancel” button
for 3 seconds. At the end of this time,
“Start/Pause/Cancel” light and all lights
go off and “Spin” lamp illuminates. If
the door is unlocked, all lights on the
indicator will go off and the “Ready”
lamp will illuminate. You can select
and start a new programme when the
“Ready” light is lit.
•
The machine can drain all the water or
can take in water for 3 times at most
to cool down the clothes and complete
the draining process. Also the “Spin”
light illuminates if the cancellation
process is activated in the middle
of the programme. The “Spin” light
goes off when discharging process is
completed. The door can be opened
and a new programme can be selected
when the “Lid” lamp illuminates.
End of programme
The “Ready” lamp on the programme
follow-up indicator will light up when the
programme comes to an end. The door
can be opened and the machine becomes
ready for a second cycle.
Press the “On/Off” button to shut down the
machine.