Filter
Top Products
7 - EN
shown with “
” symbols.
If you do not want to unload your clothes
immediately after the program, you may use
the rinse hold function in order to prevent your
clothes become wrinkled in an anhydrous
condition. With this function, your laundry is
kept in the final rinsing water. If you want to
spin your laundry after the rinse hold function:
- Adjust the spin speed.
- Press “Start/Pause/Cancel” button.
Program resumes. Your machine drains the
water and spins your laundry.
You can use no spin function in order to drain
the water without spinning at the end of the
program.
• Selectable
* Automatically selected, not cancelable.
** Energy Label program (EN 60456)
Water and power consumption and programme duration may differ from the table shown,
subject to changes in water pressure, water hardness and temperature, ambient temperature,
type and amount of laundry, selection of auxiliary functions, and fluctuations in the supply
voltage.
“Super 40” program may be selected instead of “Cotton 60” programme during winter in areas
where the input water temperature is low and/or in areas with low supply voltage.
The auxiliary functions in the table may differ according to the model of your machine.
Programme duration will be displayed on the screen of your machine according to your
selection.
Program selection and consumption table
EN
2
Programme (°C)
Max. Load (kg)
Water
Consumption (l)
Energy
Consumption
(kWh)
Prewash
Quick Wash
PHR(Pet Hair
Removal)
Anti-Creasing
Selectable
temperature range
°C
Cotton 90 7 54 2.70 • • • • 90-cold
Cotton 60** 7 52 1.19 • • • • 90-cold
Cotton 40 7 64 0.72 • • • • 90-cold
Intensive 60 7 66 1.40 • 60-40
BabyProtect 90 7 66 2.70 90-30
Synthetics 60 3 45 1.00 • • • • 60-cold
Synthetics 40 3 45 0.45 • • • • 60-cold
Super 40 7 52 0.90 40
Mix 40 3.5 45 0.55 • • • • 40-cold
Woollen 40 1.5 56 0.30 40-cold
Hand wash 30 1 40 0.25 30-cold
Daily Xpress
90 7 60 2.00 90-cold
Daily Xpress
60 7 60
1.15 90-cold
Daily Xpress
30 7 70 0.20 90-cold
Xpress Super Short
30 2 35 0.10 30-cold
Auxiliary functions