Filter
Top Products
32 / EN
Washing Machine /User’s Manual
Operating the product
5.20 End of programme
“End” appears on the display at the end of the
programme. Symbols of the programme steps
remain lit. Auxiliary function, spin speed and
temperature that were selected at the beginning
of the programme remain selected.
5.21 Your machine is equipped
with a “Standby Mode”
In case of not starting any programme or waiting
without making any other operation when the
machine is turned on by On/Off button and while
it is in selection step or if no other operation is
performed approximately 2 minutes after the
programme you selected has come to an end,
your machine will automatically switch to energy
saving mode. Brightness of indicator lights will
decrease. Also, if your product is equipped with
a display showing the programme duration, this
display will completely turn off. In case of rotating
the Programme Selection knob or pressing any
button, lights and display will restore to their
previous condition. Your selections made while
exiting the energy saving mode may change.
Check the appropriateness of your selections
before starting the programme. Readjust if
necessary. This is not a fault.