9 - EN
Starting the programme
PressStart/Pausebuttontostarttheprogramme.
Programme follow-up light showing the startup of
the programme will turn on.
Progress of programme
Progressofarunningprogrammecanbefollowed
from the Programme Follow-up indicator with the
lights "Running" and "End/Cancel".
C
Ifthemachinedoesnotpasstothespinning
step,automaticunbalancedloaddetection
systemmighthavebeenactivatedduetothe
unbalanceddistributionofthelaundryinthe
machine.
Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases
whenthewaterlevelisunsuitable.
Ifyouwanttoopenloadingdoorwhenthemachine
isinuse,press"Start/Pause"buttontopausethe
machine."DoorOpen"lightwillstartflashingwhen
the machine is switched to Pause mode. Machine
checksthelevelofthewaterinside.Ifthelevel
issuitable,"DoorOpen"lightilluminatessteadily
within1-2minutesandtheloadingdoorcanbe
opened.
Ifthelevelisunsuitable,"DoorOpen"lightturnsoff
andtheloadingdoorcannotbeopened.Ifyouare
obligedtoopentheloadingdoorwhenthe"Door
Open" light is off, you have to cancel the current
programme; see "Cancelling the programme".
Switching the machine to pause mode
Pressthe"Start/Pause"buttontoswitchthe
machine to pause mode while a programme is
running. "Running" light starts flashing on the
Programme Follow-up indicator to show that the
machinehasbeenswitchedtothepausemode.
Whentheloadingdoorisreadytobeopened,
"DoorOpen"lightwillilluminatecontinuously.
Adding or taking out laundry
Press"Start/Pause"buttontoswitchthemachine
topausemode.Whenthemachineisswitchedto
pausemode,"Running"lightflashes.Waituntilthe
LoadingDoorcanbeopened.OpentheLoading
Doorandaddortakeoutthelaundry.
ClosetheLoadingDoor.Press"Start/Pause"
buttontostartthemachine.
C
Thedoorcanbeopenedifthewaterlevelis
suitable.Dooropensymbolflashesuntilthe
loadingdoorgetsreadytobeopened.The
symbol'slightissteadywhenthedoorisready
to open. You can open the door to add/take
out laundry.
Cancelling the programme
To cancel the programme, turn the Programme
Selectionknobtoselectanotherprogramme.
Previousprogrammewillbecancelled."End/
Cancel" light will flash continuously to notify that the
programmehasbeencancelled.
C
Ifyoustartanewprogrammeaftercancelling
the previous one, this new programme will start
without draining the water in the machine.
C
Ifyoumustcertainlyopentheloadingdoor
whenthe“DoorOpen”lightisoff,youneed
to use "Spin+Pump" programme. See
"Spin+Pump"
Re-spinning the laundry
Unbalancedloadcontrolsystemcanprevent
spinningbecauseofunbalancedloadoflaundryin
themachine.Ifyouwouldliketospinagain:
Rearrange the laundry in the machine. Select
Spin+Pump programme and press “Start / Pause"
button.
End of programme
"End/Cancel" light on the programme follow-up
indicator will light up once the programme comes
toanend;and"DoorOpen"symbolflashesfor
1-2minutesuntilthedoorisreadytoopen.When
"DoorOpen"symbolissteadilyilluminated,the
doorcanbeopened.
To turn off the machine, turn program selection
knobto"On/Off"position.Takeoutyourlaundry
andclosetheloadingdoor.Themachinewillbe
ready for the next run.
Door Open
"DoorOpen"symbolisilluminatedwhenthedooris
readytoopen.Itflashesuntilthedoorgetsreadyto
open.Ifthe"DoorOpen"symbolisnotilluminated,
donotforcethedoortoopen.Thesymbol'slightis
steady when the door is ready to open.
5 Maintenance and cleaning
Servicelifeoftheproductextendsandfrequently
facedproblemsdecreaseifcleanedatregular
intervals.
Cleaning the detergent drawer
Clean the detergent drawer at regular intervals
(every4-5washingcycles)asshownbelowinorder
to prevent accumulation of powder detergent in
time.
Press the dotted point on the siphon in the softener
compartment and pull towards you until the
compartment is removed from the machine.
C
Ifmorethannormalamountofwaterand
softener mixture starts to gather in the softener
compartment,thesiphonmustbecleaned.
Washthedetergentdrawerandthesiphonwith
plentyoflukewarmwaterinawashbasin.Wear
protectiveglovesoruseanappropriatebrushto
avoid touching of the residues in the drawer with
yourskinwhencleaning.Insertthedrawerback
into its place after cleaning and make sure that it is
seated well.
Cleaning the loading door and the drum
Residues of softener, detergent and dirt may
accumulate in your machine in time and may cause
unpleasant odours and washing complaints. To
avoidthis,usetheDrumCleaningprogramme.
IfyourmachinedoesnothaveaDrumCleaning