Beko DRVT 61 W Clothes Dryer User Manual


 
9
EN
B The air ventilation hose should not be
connected to the chimney of a stove or
a replace.
B Do not operate your machine at the
same time with heaters such as a coal
or gas stove. Airow may cause the
chimney to are up. Airow may cause
the chimney to ame up.
Adjusting feet
In order to ensure that your product
operates more silently and vibration-
free, it must stand level and balanced on
its feet. Front feet of your product can
be adjusted. Balance the machine by
adjusting the feet.
1. Loosen the feet by hand.
2. Adjust the feet until the product stands
level and firmly on the floor.
C Do not use any tools to loosen the
adjustable feet, otherwise, they can be
damaged.
C Never remove the adjustable feet from
their housings.
2 plastic pieces supplied along with the
user manual prevent your machine from
slipping on wet and slippery surfaces. To
install the plastic parts:
1. Tilt your product to backwards.
2. Fit the plastic parts on to the front
adjustable feet. Press on the plastic
parts to snap them into their seating.
3. Check the balance of your product
again and readjust the adjustable feet if
necessary.
First use
To have the product ready for
operation before calling the authorised
service agent, make sure that its
location and power supply installations
are appropriate. If they are not, call
a qualified electrician to have any
necessary arrangements carried out.
Make sure that the power connections
of the product are in accordance
with the instructions given in relevant
chapters of this manual.
Disposing of packaging
material
Packaging materials are dangerous to
children. Keep packaging materials in
a safe place out of reach of children.
Packaging materials of your product are
manufactured from recyclable materials.
Sort and dispose of them in accordance
with recycled waste instructions. Do not
dispose of them with normal domestic
waste.
Transportation of the machine
1. Unplug the machine from the mains.
2. Remove the water drain (if any) and
chimney connections.
3. Drain water remained in the machine
completely before transportation.
Disposing of the old machine
Dispose of your old machine in an
environmentally friendly manner.
Refer to your local dealer or solid waste
collection centre in your area to learn how
to dispose of your machine.
Before disposing of your old machine,
cut off the power cable plug and make
the loading door lock unusable to avoid
dangerous conditions to children.