Filter
Top Products
22 / 32 EN
Dryer / User Manual
Dryer / User Manual
Operating the product
5.12 Child Lock
Machine is equipped with a Childproof Lock which
prevents interfering with the current programme flow
by pressing any button. All buttons except the On/Off/
Cancel button on the control panel are deactivated
when the Child-proof Lock is active.
In order to activate the Childproof Lock, press Anti-
creasing button for 3 seconds.
To start a new programme after the current programme
is over or to interrupt the current programme, the
Child-proof Lock should be deactivated. Press the same
button for 3 seconds again to deactivate the Child-
proof Lock.
C
Lock symbol will appear on the display
when the Child-proof Lock is activated.
C
Child-proof Lock is deactivated when the
machine is switched off and on with On/
Off/Cancel button.
When the Child-proof Lock is activated:
Display symbols will not change even if the position
of Programme Selection knob is changed while the
machine is running or in halt.
5.13 Changing the programme after it
has started
After the machine starts, you can change the selected
programme and dry your laundry in a different
programme.
1. If you want to select Extra Dry programme instead
of Iron Dry programme, press and hold the Start /
Pause button to stop the programme.
2. Select Extra Dry programme by turning the
Programme Selection knob.
3. Press the Start/Pause button to start the
program.
Adding / removing laundry in Pause mode
In order to add or take out laundry after the drying
programme has started:
1.Press Start/Pause button to switch the machine to
Pause mode. Drying process will stop.
2.While in Pause mode, open the loading door, add or
take out laundry and close the loading door.
3.Press the Start/Pause button to start the program.
C
Any laundry added after the drying
process has started may cause the
clothes that are already dried in the
machine intermingle with wet clothes and
the result will be wet laundry after the
drying process is over.
C
You may repeat laundry adding or
removing process as many times as
you desire during drying. However, this
process will increase the programme time
and energy consumption since the drying
process will be interrupted repeatedly.
Therefore, it is recommended to add
laundry before the drying programme has
started.
C
If you select a new programme by turning
the Programme Selection knob while
your machine is in Pause mode, then
the current program is aborted and new
programme information is displayed.
CAUTION: Do not touch the inner surface
of the drum when adding or taking out
laundry while a programme is running.
Surfaces of the drum are hot.